0
What else can I help you with?
How much in a ton of wood?
The weight of a ton of wood varies depending on the type of wood, but on average, a ton of wood can be around 2000 pounds or one ton (short ton).
How many trees are cut down in the process of paper?
it takes 4 tons of wood to make one ton of paper
What is heavier a pound of gold or a ton of paper?
A ton of paper. Any ton is heavier than a pound. One ton is equal to twenty-thosand pounds, whether is paper, or anything else.
How much money can you get for recycling paper?
Paper, like most recyclable commodities, has a set value per ton as waste paper. Find out what the value per ton of waste paper is in your area, and that's how much you can get for it.
How much is a ton of paper?
The price of a ton of paper can vary widely depending on factors such as the type of paper, quality, and market conditions. On average, the price can range from $200 to $800 per ton for standard office paper, while specialty papers or higher-quality paper may cost more.
How much does it cost to make a ton of paper?
$1,000,000
How much raw wood makes 1 ton of wood pellets?
You need 2.5-3t raw wood material
If 12 sheet of paper weights 0.84375 kg how many sheet of paper can be made from 1 ton?
This can be solved with simple math, multiplication and division.12 sheets of paper = .84375 kg(divide by 12)Each sheet of paper = 0.0703125 kg(Convert tons to kg)1 ton = 907.18474 kilograms(Divide total weight of a ton in kg by the weight of a single paper)907.18474/0.0703125= 12,902.18312,902 sheets of paper can be made out of a ton
How much wood in a ton?
It depends on the type of wood because the volume of wood required to make a ton varies with the density of the wood. Find a chart of wood densities here: http://www.simetric.co.uk/si_wood.htm By my calculations (and I'm no mathematician), if you use aspen (420 kg/m3), it would take 2.15m3 of wood to equal a ton.
How much paper can be made from a tree an average tree... or from a defined amount of wood. How much of a ton of tree will become paper and how much is lost in the process?
According to the Technical Association of the Pulp and Paper Industry (TAPPI), and the American Forest & Paper Association, only about one-third of the fiber used to make paper in the U.S. is from whole trees. only trees smaller than 8 inches in diameter, or larger trees not suitable for solid wood products, typically are harvested for papermaking. The remaining two-thirds is made up of residue (wood chips and scraps left behind from forest and sawmill operations), and recovered (recycled) paper. Assume that the paper in question is typical 20lb copy paper, and it has been produced using 100 percent hardwood, measured in cords. A cord of wood is approximately 8 feet wide, 4 feet deep, and 4 feet high and weighs roughly 2 tons (15-20% water weight). It has been estimated that one cord of this wood will yield an average of 1,500 pounds of paper (300 reams).
How much oil does it take to process one ton of wood?
10 gallons
What are facts about paper?
* The United States and Canada are the world's largest producers of paper and paper products . The next largest are Finland, Japan, and Sweden, who produce significant amounts of wood pulp and newsprint. * The U.S. consumption of paper and paperboard in 1999 was approximately 354 kilograms (about 800 pounds) per person. * Recycling one ton of paper saves about 17 trees * Today, more than 95 percent of paper is made from wood cellulose.
