different parts inside the gearbox will have driped dry and make more noise after starting from cold this noise should go away fairly quickly as the running gears move the oil around the gear box
It will normally start with a leak at the pump. If the impeller breaks you will hear a rattling noise at the pump.It will normally start with a leak at the pump. If the impeller breaks you will hear a rattling noise at the pump.
start by checking a/c compressor.
water vavle on the dw is the problem
Sounds more like a lack of oil or oil circulation problem. I hope you are not one that races the engine to hear how good it sounds. Flush the engine, change the oil and filter and never race a cold engine to warm it up. The rattling may be worn out lifters. Now pray. lol
Define not start?
Is this an automatic or manual transmission?
i had some type of problem with my Transmission it had a loud humming noise whenever i start, the humming would go away when ever i start moving, but when i came up to a stop sign or a red light the humming would start, my friend who is a very good repair in all type of automotive told me my transmission oil pump was bad, well after he change the transmission oil pump the problem was gone.
Symptoms of a worn timing chain are some or all of these:Rough idle.Backfiring, bucking, or sputtering.A rattling noise from the chain.Engine may not start.
You might want to have the CV joints checked. When bearings start to go out, they make a "clicking" or "rattling" noise while driving - especially while making turns.
O2 sensor
The 350 bruin rattling starter solenoid typically refers to an issue where the starter solenoid makes a rattling noise when attempting to start the engine. This can occur due to wear and tear, loose connections, or a failing solenoid. It may result in poor electrical contact, leading to intermittent starting problems. Addressing the issue often involves inspecting and possibly replacing the solenoid or ensuring all connections are secure.
Most likely your safety neutral switch or your PRNDL swith is going bad Go to a transmission shop and have it replaced. Or possibly the linkage is loose. Also go to a transmission shop and have it repaired.