0
What is the difference between High Pressure Die Casting and Low Pressure Die Casting?
The high-pressure die casting is finish injection molding under mechanical high-pressure . Suitable for thin wall casting. The low pressure die casting is that the liquid pressure within the pressure vessel so that the liquid level rise and get the castings. suitable for thick wall castings. Gravity casting is casting with the gravity of the liquid itself. Suitable for general castings.
What else can I help you with?
What is the difference between die casting and pressure die casting?
In sand mold casting the molten metal is poured in to the mold cavity , while in pressure die casting the molten metal is forced under high pressure in to the cavity. The sand casting process is used for small batch production where pressure die casting is used for mass production.
Difference between die casting and sand casting?
Sand Casting-is a cast part produced by forming a mold with the help of a model or pattern pressed into a sand mixture and then removed. Die Casting- is the process of forcing molten metal under high pressure into mold cavities (which are machined into dies).
What is the difference between gravity die casting and die casting?
Die casting is done by forcing molten metal under high pressure into a mold. Gravity die casting is a simpler method in which molten metal is poured into the mold rather than using force and high pressure. Gravity die casting is mostly used for only simple shapes, while die casting can be used for much more complex ones.
What is the difference between high blood pressure and hypertension BTW high blood pressure?
High Blood Pressure and Hypertension are the same thing
What is meant by pressure die casting?
Pressure die casting is the term used when metal is forced under high pressure into a die casting mold or die. The die casting process in USA is "pressure die casting" but referred to simply as "die casting" refer to http://www.kineticdiecasting.com/what-is-die-casting.html
What is the difference between pressure part and nonpressure part?
Pressure parts are components of a system that are exposed to high pressure, such as boilers or pressure vessels, while nonpressure parts do not experience high pressure. Pressure parts are designed to withstand the stresses induced by high pressure, while nonpressure parts may not need to meet the same stringent requirements.
What is the difference between older and younger peoples blood pressure?
Basic Difference younger people blood pressure- High. older people blood pressure -Low.
Can you do brass pressure die casting?
Yes you can do brass low and high pressure die castings.
When there is a great difference in air pressure between two areas winds are slight or strong?
When there is a great difference in air pressure between two areas, winds are strong. The air moves from high pressure to low pressure, causing faster winds to equalize the pressure difference.
What is Flowing air responding to the difference between higher and lower pressure is responding to what?
Flowing air responds to the difference in pressure between higher and lower pressure areas by moving from high pressure to low pressure to equalize the pressure. This movement of air creates wind, which is the result of the pressure difference seeking equilibrium.
What is the advantage of gravity die casting over high pressure die casting?
The tooling for gravity casting costs less than pressure die casting but the part cost in pressure die casting is much less. see Sand Casting. Die Casting: In the high pressure, requires a die casting machine to inject molten liquid or semi-liquid metal to a higher rate of die-casting mold cavity filling and solidification under pressure, forming and casting methods obtained. Gravity Casting: Uses the gravity or weight of the metal to fill the cavity producing a metal part. It does not require the use of an expensive die casting machine. The tooling cost is lesser for gravity casting because of the lower pressures needed to produce parts.
How do you know the difference between the high pressure power steering line and the low pressure line on a 1998 Mercury Mountaineer?
High pressure line gets very hot.
