Wiping up water spills immediately in a laboratory helps prevent slips, falls, and contamination of experiments or equipment. It also reduces the risk of electrical hazards and maintains a safe working environment for researchers.
The ninjas will come and send an electrical shock through it.
Water conducts electricity and is therefore contraindicated for use on energized electrical equipment, however it is much cheaper than the chemicals that can be used on energized equipment making it more economical when water is able to be used. Similarly water should not be used on grease fires as it will spread out the grease and the fire rather than smothering it.
Switch off the electrical instrument immediately and dry up the water visible to you and if the water has seeped inside the instrument then you should leave it to dry in the sun for a couple of days before you use it again. Make sure that the instruments fry before you plug it back.
Water conducts electricity and is therefore contraindicated for use on energized electrical equipment, however it is much cheaper than the chemicals that can be used on energized equipment making it more economical when water is able to be used. Similarly water should not be used on grease fires as it will spread out the grease and the fire rather than smothering it. Water if pure without contaminants does not conduct . Having stated that electrical fire can hardly be contained by water since the air itself will conduct electrons by ionization. So to contain an electrical fire a the oxygen must be removed and water will not do that.
A water fire extinguisher is not suitable for a confined electrical machinery room because water conducts electricity, which poses a significant risk of electrocution when used on electrical fires. Additionally, water can cause further damage to electrical equipment and create hazardous conditions. Instead, appropriate extinguishers, such as CO2 or dry chemical types, should be used to safely address electrical fires without the risk of electrical shock or equipment damage.
Water conducts electricity So the current could go back up the stream of water and electrocute the user
When refueling an outboard boat with a portable tank, it's best to ensure that the boat is on stable ground and not in the water to prevent spills. Always turn off the engine and any electrical equipment before starting the refueling process. Use a funnel or spout to minimize spills, and avoid overfilling the tank. Finally, check for any leaks or spills afterward and properly dispose of any soaked materials.
U see, when u throw water on a computer it has a very bad affect because the water goes to the wires and u should know that when electrical things are hit by water, they get ruined therefore the computer will get ruined and will stop working.
Working on electrical equipment in a damp area can increase the risk of electric shock. Water is a good conductor of electricity and can lead to short circuits or malfunctions in the equipment, posing a serious safety hazard. It is important to ensure that the area is dry before handling electrical equipment to prevent accidents.
Water is such a great conductor of electricity the equipment should work great under water. Check the manual though to be sure.
Ships using ocean water to wash their fuel tank-----------aplus c=3