0
What else can I help you with?
What color is the wire for the oil sending unit in a 1978 corvette?
it is a tan wire or so the wire diagram says
What color is the Signal wire for IAT Sensor on a 2004 3.5 I-5 Colorado?
The signal wire should be Tan. You should have a Yellow, Black, and Tan Wire. The Yellow being you MAF Sensor Signal. The Black being a Low reference voltage. Then your Tan your IAT sensor signal.
Can you connect a 6mm earth wire to a 2.5 mm earth wire?
A 6 mm earth wire can be used to replace a 2.5 mm earth wire, but if there is an existing 6 mm earth wire it must be 6 mm all the way to the earth, and not replaced by a smaller wire between it and the earth connection.
Wire for electric spark timing in bypass mode tan and black striped wire?
Yes, that is the one you unplug.
Wire that discharges excess electricity to the earth?
It is the earth wire
When charge are able to flow directly from the circuit into Earth a ciruit electrically?
That is what the Earth wire does. Normally it does not carry current but it has this important safety function.
What color is the tachometer wire on a 95 Z28 Camaro?
lt. brown or tan
What does it mean tan wire?
The color coded jacket is so you can look it up on a wiring diagram for whatever it is to see what the wire goes to.
What was the crow doing on the telephone wire?
Making a long bir tan he had
What wire on a 3 line wooden pylon is live neutral and earth?
On a 3-line wooden pylon, typically the top wire is the live wire, the middle wire is the neutral wire, and the bottom wire is the earth wire. It is important to contact a professional electrician to properly identify and work with these wires to ensure safety.
What does green wire indicates?
Earth wire
Which wires are the live neutral and earth on a Chinese cable where the colours are brown blue and white?
In a Chinese cable with brown, blue, and white wires, the brown wire is typically the live wire, the blue wire is the neutral wire, and the white wire is the earth wire. It is important to double-check with a qualified electrician or follow local regulations to ensure safe wiring practices.
