to put comtainers upon, especially when heating above a Bunsen burner
A tripod is a three-legged stand used to support surveying instruments such as total stations, levels, or lasers. It provides stability and ensures the accuracy of measurements by keeping the instrument level and secure during data collection. The height of the tripod can be adjusted to suit the needs of the surveyor and the terrain being surveyed.
It is used for ontop of the bunset burner :)
Yes, a transit is a foundational tool used in land surveying to measure angles and distances with precision. It consists of a telescope mounted on a tripod and allows surveyors to establish straight lines, measure vertical and horizontal angles, and determine elevations on a piece of land.
Traverse surveying is a method used in land surveying to establish control points and boundaries by measuring a series of connected survey lines. It involves measuring both angles and distances between points to accurately map out the boundaries of a piece of land. Traverse surveys are commonly used in construction and engineering projects to create detailed site plans.
Above Ordnance Datum is a reference elevation used in surveying that is based on the mean sea level. It provides a standard benchmark for measuring height or altitude across different locations. This datum is commonly used in the UK and other countries for mapping and surveying purposes.
Advantages of Traverse Surveying: Traverse surveying creates a closed loop, which confirms the accuracy of the survey. It is suitable for surveying large areas with a minimum of time and effort. This method can be used for both plane and geodetic surveying. It is easy to calculate the coordinates and areas by using the traverse surveying method. Disadvantages of Traverse Surveying: The accuracy of the survey is dependent upon the accuracy of the instruments used for the measurements. This method requires a long base line which is not always available in certain circumstances. Traverse surveying is not suitable for rough terrain as measurements can be affected by uneven ground. It is difficult to locate the exact points when the measurements are taken from a long distance.
The conclusion of traverse in surveying is the final determination of the lengths and directions of all survey lines, typically shown on a survey map or plan. This information is critical for accurately defining the boundaries and features of a piece of land.
In surveying they were used to measure horizontal and vertical angles. They were basically a small telescope mounted on a tripod
Most surveying instruments are mounted on a tripod with a flat surface on top. A tilting level tripod has a curved surface on top. The tripod does not need the precise set up procedure because the tilting level can be shifted up or down along the top of the curved tripod head until the levels own level vial is horizontal and then measurements can be made.
yes
cavemen - nobody gets credit for inventing anything that had been in use since ancient times, unless youre talking about some specific type of surveying tripod - but that was not in the question.
a tripod stand is used to hold the beaker.
A tripod is a portable three-legged frame, used as a platform for supporting the weight and maintaining the stability of some other object. Objects that might sit on a tripod include: a cooking vessel a sacrificial altar a weapon/firearm a camera a flash unit a mounting head surveying instruments telescopes binoculars an offshore wind turbine a gauze square a beaker a flask a sand bath
Most surveying instruments are mounted on a tripod with a flat surface on top. A tilting level tripod has a curved surface on top. The tripod does not need the precise set up procedure because the tilting level can be shifted up or down along the top of the curved tripod head until the levels own level vial is horizontal and then measurements can be made.
You put a "head" on a tripod. (At least in photography).
If you mean a stand used for steadying the camera while taking pictures, then it's called a tripod.
The tripod is a three-legged rack used for supporting eg. like apparatus
A Gauze is used to hold a beaker on top of a tripod (not a space ship). So it doesn't go through the tripod
A tripod is a 3 legged metal object that is used to hold object (beakers and stuff) above something (bunsenburner) it is used by the chemists for performing experiments.