0
What is the reason for measuring the bearing of survey lines in a compass traversing at both ends?
Wiki User
∙ 8y ago
It is to alert the surveyors to any magnetic anomaly that may affect one of the ends. The anomaly would arise because of geological features.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
What are the sources of errors in compass survey?
Dead Reckoning and Compass SensorsDead reckoning is the mathematical process of calculating the current position of an object based on knowledge of the location of its previous position and the distance and direction it travelled from this position to reach its current position. It is a navigational system which has been in use since medeval times and is very popular in robotics. Whilst deadreckoning is one of the simplest forms of navigation, implementation of the method suffers from an unbounded accumulation of errors. These errors can be significantly reduced if an absolute direction reference is available for the dead reckoning calculations.Geomagnetic compass sensors provide an absolute direction reference. Provided there are no local sources of ferrous material or magnetic fields a freely suspended magnet will always point to the magnetic north pole. The Earth generates a magnetic field due to the motion of liquid layers which surrounds the Earth's iron core. The field surrounds the Earth and the north magnetic pole is located in the Parry Islands of northern Canada approximately 400 km from the axial north pole.Large errors can be induced in geomagnetic compasses by the close proximity of a magnetic field or source of ferrous material. This is often stated as the main reason for not using these sensors. What follows is a description of a system which has been designed to identify and where possible remove this source of error. Geomagnetic Compass ErrorsThe magnetic field surrounding the Earth and the north magnetic pole is located approximately 400 km from the axial north pole but constantly moves. The resulting field is horizontal at the equator and vertical at the magnetic poles. In the absence of any local sources of ferrous material or magnetic fields a geomagnetic compass will always point to the magnetic north pole. Additional errors can also be induced in a geomagnetic compass by the vertical portion of the earth's magnetic field, these errors are greatest near the magnetic poles. The geographic location of the UK results in these errors being insignificant provided the compass sensors are kept horizontal.The position of the magnetic pole with respect to the axial pole and the movement of the magnetic field produce a declination which varies with time and geographic location. The amount and variation with time of the declination for any given area is printed on Ordinance Survey maps and can easily be incorporated into dead reckoning software. The declination correction need only be applied if the heading information is to be related to true north rather than magnetic north.Of greatest significance are the errors induced by the close proximity of ferrous objects or local magnetic fields such as those produced by electric cables or the magnets in motors. It is often stated that it is difficult to use geomagnetic compass sensors indoors due to the distortion from electric cables and steel structures and this is the main reason for not using a compass. Any deviations to the geomagnetic compass sensors due to the vehicle on which it is mounted can be reduced by the placement of compensating magnets or iron bars in the close proximity of the compass. This technique is described in detail in the old Admiralty Handbooks published by HMSO.Ferrous objects, in particular large objects such as ships, gain a permanent magnetic field during construction due to the electric currents used during welding and the effects of hammering and heating the metal during riveting or forming the members. If the object is left in one position for a long period of time it will also gain an induced magnetic field due to the effects of the earth's magnetic field.The deviation of any geomagnetic compass mounted on the vehicle will vary with the direction the vehicle is pointed and with latitude. The deviation may be reduced by placing small corrector magnets, soft iron spheres and soft iron bars known as flinder's bars around the perimeter of the compass. The process is one of trial and error which used to be carried out yearly on naval vessels. The Aldmiralty Handbook also required that the officer of the watch remove his keys, knife and any other magnetic objects from his person before using the ship's compass.Whilst the full process of correcting a compass may be excessive for the application of compasses in robotics it does highlight the need to site the sensor carefully to avoid deviations and to choice the materials out of which the robot is constructed carefully. When mounting the compass sensors on the wheelchair chassis which was to be used as a mobile robotics platform it was found that the effect of the steel frame and motor magnets diminished significantly if the sensor was kept at least 150 mm from any such objects. As a result the sensors were mounted on a copper tubing frame at the front of the wheelchair.Background reading failed to find any methods to directly reduce or eliminate the effect of errors sources other than those associated with the vehicle on which the sensors were mounted. Although several sources suggested that the fusion of the compass sensor data with data from other sensors may overcome the problem. External Error Source IdentificationThe possible sources of error due to external phenomena or objects identified during background research were magnetic fields associated with electric cables and the attraction of the geomagnetic compass sensor to ferrous metal objects such as heating radiators or structural steel members. Trials with a hand held compass designed for mountaineers suggested that such objects influenced the compass at a distance of approximately 300 mm.A basic principle of physics was exploited to provide an innovative means of identifying and correcting for external error sources. Due to the distance travelled the light from the sun is assumed to be from a point source and all the light rays are assumed to be parallel to each other. Any source which is an infinite distance from a detector will produce radiation in parallel rays. If the magnetic north pole, towards which all geomagnetic compasses point, is assumed to be an infinite distance from the geomagnetic compass then this principle will also apply. Thus all geomagnetic compasses will point in the same direction regardless of the separation between the individual compasses. Whilst strictly this is not true, the declination variation (taken from an Ordinance Survey map) is 3.24" per meter in the area the project work was carried out. This figure is 2 orders of magnitude less than the typical manufacturer's stated accuracy of compass sensors and significantly less than the 10' annual change in declination.To implement this principle a number of geomagnetic compass sensors need to be arranged such that it is not possible for an external ferrous source or magnetic field to effect all of the compass sensors in the same manner. If enough sensors are used it is then possible to use a voting system to choice the correct bearing to magnetic north if all of the sensors are not giving the same reading. With only two sensors it is possible for an external ferrous material source or magnetic field directly in line with the two sensors to produce a result similar to that of the magnetic north pole. By using a triangular formation it is not possible for an external magnetic field or source of ferrous material to produce the same deviation in all three compasses, but it is possible for two of the sensors to be indicating the same direction incorrectly and thus causing an error in the voting system. A minimum of five sensors arranged in a pentagon are required to ensure that a voting system will always indicate a true bearing to magnetic north, although this arrangement would still fail in the presence of a very large external magnetic field. The Resource constraints will usually limit the system to the use of three compass sensors arranged to occupy the points of a triangle. The length of the sides of the triangle are limited by the wheelchair frame footprint and are approximately 300 mm long. Figures below show the operation of the compasses under a variety of situations.Figure 1Figure 2Figure 3Figure 1 shows the direction indicated by the compass sensors when the robot is travelling towards magnetic north with all of the sensors pointing in the same direction. If the robot undertakes a 90o turn the three compass are all still pointing in the same direction as shown in figure 2. However if, as shown in figure 3, the compass sensors are influenced by an external ferrous material or magnetic field source at least one and possibly all three sensors will point to the error source. In order to produce an error the error source must be close to the robot in which case the distance from the source to the sensor can no longer be assumed to be infinite. As a result the sensors will not all give indicate the same direction and this can be detected by the compass sensor processing software, action can now be taken on discovering the discrepancy.
Why do people like to kill other people?
If, as you state, there is no reason for it then it is pointless asking for a reason.
What is the reason of existence of subculture?
civilization of war.
What is a common reason for resistance to receiving help?
Pride.
What is the main reason for conducting safety surveys?
To identify hazards
Keuffel and Esser contractor's compass Why are E and W transposed?
The reason for this is that it is a surveyor's compass with fixed sites along the north south axis and this allows easy non reversed readings of bearings. When you turn the compass siting on this axis the needle of course follows magnetic north. Align the sights with magnetic north and then turn the compass clockwise 45 degrees which should be North East or N 45 degrees E and you will see that the needle is showing the correct bearing because the East and West are reversed. Ken S.
Why the compass shows north in Telugu?
same reason it shows North anywhere. The needle of a compass is a magnet. It points to the North Magnetic Pole.
What scientific reason is there for measuring air pressure?
loop is funny
What is a reason to use a compass rather than a GPS?
To navigate your way if your in the middle of nowhere.
What happens when you overheat a bearing?
When a mechanical bearing becomes overheated for whatever reason, the lubricating material will become less viscous, and the danger of metal-to-metal contact increases. This will lead to the failure of the bearing.
Can you put a used piston in car?
There is no reason why you can't. If the rod bearing is still in it, you can tell if it has been spun. If the bearing appears alright, there should be no reason to have it checked. You would use new rings and a new bearing which are the parts that matter. You might even be able to use the old rings and bearing, but no one would. Too much chance of having a problem after it was put in.
How can you measure bearing?
It depends on the type of bearing, and which measurement. A double race roller bearing is measured on the inside (shaft diameter) with an internal vernier caliper or similar device. On the outside (casing or pillow block diameter) with an external vernier. And the width (or length) of each race can be measured with and external vernier. A babbitt bearing can be measured by measuring the journal on which it is to be mounted, then taking "leads" (or using plastigages), by placing lead fuse wire or a plastigage on the journal, placing the bearing top half over the leads, and bolting down the bearing housing over that. Then unbolt the bearing housing remove the top half the bearing and with a micrometer measure the crushed thickness of the fuse wire. Add this to the journal diameter to get the internal diameter of the bearing. The main reason for taking leads is to determine the oil wedge gap in the bearing to see if it is the right thickness. If it is too thin the bearing needs to be scraped if it is too thick the bearing needs to be replaced or the journal built back up to the correct diameter.
What is stronger hip or shoulder joint why?
In humans, the Hip. The reason because it is weight bearing.
Can you tow a 2007 Jeep compass 5 speed manual transmission 4 wheels on ground?
Hi, Thank you Rdrsh for your answer, any REASON why you cannot flat tow a MANUAL Jeep Compass 2007 ??
What the reason of kw and amps mismatch?
its the operating power factor & bearing conditions(rotary equipments)
Are the units of volume cubed or squared why?
Cubed. The reason is that space has three dimensions - and that is basically what we are measuring.
How will humans survive without measuring tools?
We humans do still have measuring tools, so I am not sure why this question comes up, but if for some reason we were to lose all of our measuring tools, then we would just have to make estimates. Or create new tools.
