0
Chevrolet
A brand of vehicle, Chevrolet or Chevy was produced by General Motors Company (GM). The car was named after Louis Chevrolet and was set up to sell a variety of mainstream vehicles to compete with Model T by Henry Ford.
6,429 Questions
What is the cost of a replacement Chevy truck seat?
Andy's Auto Sport sells customizable-width PRP benches for Chevy trucks for $373 for widths up to 36 inches, and $416 for widths from 49 to 68 inches. Prices from other companies may vary. Many replacement seats are also available on eBay, where excellent deals are sporadically available. Try searching for misspelled items that are missed by other bidders.
Who were the founders of the Chevrolet brand of cars?
The Chevrolet is a brand of vehicles produced by GM (General Motors). It was originally founded by the founder of General Motors William C. Durant in 1911.
Where could one buy a Chevy 1500 4x4?
One could buy a Chevy 1500 4x4 at one's local Chevrolet dealership. Chevrolet dealerships can be found from the Chevrolet official website. This involves inserting one's zip code.
What is the price of a 1972 Chevy truck?
A 1972 Chevy Truck, which was a popular mode of transportation back in 70's, can vary in cost greatly. However, its cost today would be around 11,000 dollars.
93 Chevy Camero how long does it take to remove and replace a water pump?
can u sell me your car call this number 000
What is the best motor to put in a 1956 Chevy Bel Air?
Depends if you want the car to be as close as stock as it can be or if you are just building it to drive. If you are going stock then you will have to install the original engine type which will be either a 235 cubic inch 6 cylinder or 265 cubic inch V8. The serial# plate will tell you which engine was installed from the factory. It will look like this.
V C 56 S 1001
V = V8 (no letter here means it was a 6 cylinder)
C = BelAir
56 = Year
S = Assembly Plant S=St. Louis. A=Atlanta, B=Baltimore, F=Flint, Mich, J=Janesville, Wisc, K=Kansas City, L=Los Angeles, N=Norwood, Ohio, O=Oakland, T=Terrytown, N.Y.
1001= Serial #
If you are not looking to go stock then a small block 350 Chevy Crate engine would be the way to go. Not that expensive and comes with a 3/36 warranty. You can even get one with fuel injection. Contact your local Chevy dealer for more info.
Where is the fuel door release on a 2013 Chevy Cruze?
If you didn't get an owners manual with the car you can find it in related links.
According to page 1-6 it says the large lever on the side of the seat closest to the front of the seat will raise and lower it.
On page 9-49 it says The tethered fuel cap is behind the fuel door on the vehicle's passenger side. To open the fuel door, push the rearward center edge in and release. When applied pressure is removed, the fuel door will spring partially open.
Do you need a CDL for a Chevy c7500 with air brakes?
Just to set the record straight, the presence of air brakes has absolutely zero effect on whether or not a vehicle requires a CDL to be driven. None. Nada. Zilch. Zip.
As for the C7500, a quick search online shows various model years to have Gross Vehicle Weight Ratings from 31,000 to 33,000 lbs. - this exceeds the 26,000 lb. GVWR limit for a non-CDL license, so the answer would be yes... UNLESS, it falls under one of the following exemptions and circumstances pertaining to those exemptions:
- Emergency vehicles, when operated by personnel of those emergency services in the course of their duties. Departments might require a CDL, however.
- Military vehicles, when operated by military personnel in the course of their duties. Contractors and civilian DoD employees are not covered under this exemption.
- Recreational vehicles, when operated for one's own personal use and for leisure purposes, and never on a for-hire basis.
- Farm vehicles, registered as such, used ONLY for the purposes of that farm, not operated on a for-hire basis, operated within a 100 air mile/150 road mile radius of the farm to which the vehicle is domiciled, and operated by the farmer, immediate family members of the farmer, or direct employees (W2 employees, not 1099 contractors) of the farmer.
How do you remove the hood of a 1952 Chevrolet car?
Unbolt the hinges from the body. Be sure and mark their exact location so when you put them back you will have the hood aligned.
What kind of engine does the Chevrolet Uplander have?
The Chevrolet Uplander's engine comes in a 3.5 LX9V6, a 3.9 LZV6 and a 3.9 LGD V6. The Chevrolet Uplander was first produced in 2005, and they were stopped in 2009.
Where is a good place to get a Chevrolet Caprice worked on?
There are many car repair shops that can help in this matter. One can go to the website ConsumerReports where one can look for the best car repair shop available.
What type of vehicle is the Chevrolet Express?
They are full sized vans from GM. They have different styles of this like the Chevy express Cargo it is a full sized van. They have the Express Passenger that is a passenger van that seats up to 15 passengers.
Where could one get a 1955 Chevy?
One could find an old 19955 Chevy in the ads in the local newspaper(s). There are car auctions and swap meets that one could go to and buy or trade their vehicle for.
How would one go about working for Chevrolet?
A great place to start when inquiring about employment through Chevrolet would be to look at job openings available. If there are not any job openings available for your particular field, a call into HR may help. Also, sending in a resume to HR is a great bet.
Where is a reliable source for Chevy parts for a person living in Houston?
The most reliable source for Chevy parts in Houston are Chevy dealerships in Houston. These include Lone Star Chevrolet, Davis Chevrolet, Mac Haik Chevrolet and AutoNation Chevrolet.
Who first designed the Chevrolet SSR?
Gary Oak first designed the Chevrolet SSR back in 1961. This was the first vehicle of its design to feature driver safety precautions built into the car.
What is involved in opening Chevrolet dealerships the United States?
Involved in opening Chevrolet dealerships in the United States will be the necessity of obtaining permission from General Motors Corporation, having the initial investment funds, obtaining local and state permits as needed to begin the process. Having money and meeting the requirements set forth by GM will be the first two basic steps involved in opening a Chevrolet dealership in the United States.
Where can one find a 1955 Chevy for sale online?
One could start to look for a 1955 Chevy for sale online at eBay where there are many used cars for sale. The website Cars On Sale is also likely to sell a 1955 Chevy.
Where is the best place to sell a 2007 Chevy in Tahoe?
The best place to sell a 2007 Chevy in Tahoe would be online or in various car trader magazines. If you really want to sell your Chevy, you have to make it known that you want to sell it. How many newspapers are there in your town? Advertise with them. You might have to spend a few dollars, but it's worth it.
What is the release year for the Chevy SS?
The Chevrolet SS (Super Sport) car was first released in South Africa in 1970. A new version was released in 2003 by General Motors. A new version will be released in 2013.
Where can one buy a second hand Chevy Uplander?
A second hand Chevy Uplander can be purchased from all good garages and car dealerships. Try the listings for the local area, or speak to a local mechanic.
What body style does the SS Chevrolet have?
The SS Chevrolet was manufactured in several body styles between the years 1964 and 1977. It was available as a coupe, sedan, convertible or station wagon.
How long is the warranty for Smith goggles?
The warranty for products on Smith Optics lasts for the lifetime of the product. This warranty is only available to people who live in the US. Further details on the warranty can be found on the Smith Optics website.
How long is a warranty on a Sunbeam Mixmaster?
The Sunbeam Mixmaster has a 1 year (12 month) warranty. Some carry a 5 year warranty on the motor, but that is at an extra cost. Extended 3 year warranty's are also available.
