Why is circumference equal to 2 times Pi times r?
Circumference = pi times diameter
or
Circumference= two x pi x radius.
Now remember the diameter of a circle is the straight line from one edge of the circle, through the centre to the opposite edge.
The straight line from the edge to the centre is the radius, and then from the centre to the opposite edge is another radius. So the diameter is the length of two radii.
Algebraically express as d = 2r.
So Algebraically
C = pi*d
Substituting the 'd' for '2r'
C = pi2r
However in algebra coefficient numbers are expressed to the left. Hence
C = 2pir
Why 'C' is this expression I would have to go into some 'very heavy' differential calculus.
Suffice it to say, the ancients found that the circumference traced by a donkey/mule driving water out of well was directly proportional to the diameter, twice the length of the tether(2 radii).
From this they discovered that for however long the the tether and the circumference were. they had a constant of proportion
C directly related to diameter.
This is equated to
C = kd
And
k = C/d , which was founf to be 3.141592..... which now call 'pi'. for any sized circle.
So today in school you learn
C = pi d
or
C = 2 pi r
And for circular area(A)
A = pi r^(2)
The 'pi' youare given in school is proabably 3.14 , 3.1416 or 22/7 . However, these values are Approximatons, because 'pi' is an irrational number.
Hope that helps!!!!!!
How many lines symmetry does a parrallelagram have?
First of all to correct your spelling. It is 'parallelogram'.
A parallelogram does NOT have any lines of symmetry, unless it is a rectangular paralleligram. Where upon it has two lines of symmetry, viz/ a vertical line through the centre and an horizontal line through the centre.
What is an all round perimeter?
Oh, dude, an all-around perimeter is like the total distance around a shape, you know? It's basically the sum of all the sides of a shape. So, if you're trying to fence in your yard, you better know that all-around perimeter to make sure you buy enough fence, man.
What is the volume of a 3.2 cm cube?
Well, isn't that just a happy little cube! To find the volume, you simply multiply the length, width, and height together. So for a 3.2 cm cube, you would calculate 3.2 cm x 3.2 cm x 3.2 cm to find the volume. Just remember, there are no mistakes, just happy little accidents in math!
What is the formula for the area of a circle with a diameter of 100?
The formula for the area of a circle is A = πr^2, where A is the area and r is the radius of the circle. To find the radius from the diameter, you divide the diameter by 2. So, for a circle with a diameter of 100, the radius would be 50. Plugging this into the formula, the area would be A = π(50)^2 = 2500π square units.
What is a 3000000000 sided polygon?
A 3,000,000,000 sided polygon is called a teragon. Polygons with such a large number of sides are typically referred to by their numerical prefix followed by "gon." The properties of a teragon would be similar to those of a regular polygon, with equal side lengths and interior angles, but it would be practically indistinguishable from a circle due to the extremely large number of sides.
In the context of structural engineering, the weakest shape is often considered to be a thin, flat shape such as a sheet or plate, due to its susceptibility to buckling under compressive loads. In terms of materials science, an amorphous shape lacking a defined crystalline structure can be considered weak due to its lack of internal order and inherent brittleness. Overall, the concept of weakness in shapes is highly dependent on the specific application and the type of forces or stresses being applied.
What is the area of a rectangle with length 11cm and width of 9cm?
To find the area (A) of any rectangle, we multiply the length (l) by the width (w). In the case of a rectangle that is 11 cm by 9 cm, we do this:
Arectangle = l x w = 11 cm x 9 cm = 99 cm2or 99 square centimeters.
What is the radius of a circle of a circumference of 121?
To find the radius of a circle with a circumference of 121, you can use the formula for the circumference of a circle: C = 2πr, where C is the circumference and r is the radius. Given that the circumference is 121, you can plug this value into the formula and solve for the radius. Dividing 121 by 2π will give you the radius of the circle, which is approximately 19.24 units.
How many edges in a 100-gon pyramid?
A pyramid with a polygonal base has as many edges as the number of sides of its base plus the number of edges in the base. A 100-gon pyramid would have 100 edges on its base and an additional number of edges equal to the number of sides of the base, which is also 100. Therefore, a 100-gon pyramid would have 100 + 100 = 200 edges.
Does a trapezoid have a pair of perpendicular lines?
The only requirement for a trapezoid is that one pair of opposite sides be parallel. There could be trapezoids with a pair of perpendicular lines.
How do you find the formula for the volume of a square triangle prism?
The volume of a prism is A = Bh , where B is the area of the base, and the height (length) must be perpendicular to the base.
The volume of a square-sided triangular prism is A = 1/2 bhL where the triangular cross section has base b, and height h, and the perpendicular length is L.
If each edge of a cube is 10 in long then what is the area of each face?
Well, honey, since a cube has 6 faces and they're all the same size, the area of each face would be the same. So, if you want to find the area of one face, you can just take one edge and square it. In this case, since each edge is 10 inches long, the area of each face would be 100 square inches. Hope that clears things up for ya!
How many pennies would it take to fill a 7 gallon jug?
To calculate the number of pennies needed to fill a 7-gallon jug, we need to consider the volume of a penny. A penny has a volume of approximately 0.36 cubic centimeters. One gallon is equivalent to approximately 3785 cubic centimeters. Therefore, a 7-gallon jug would have a volume of 26,495 cubic centimeters. Dividing the volume of the jug by the volume of a penny gives us approximately 73,597 pennies needed to fill a 7-gallon jug.
What is the formula to finding the perimeter of a cone?
The formula to find the perimeter of a cone is not commonly used, as the perimeter is typically associated with two-dimensional shapes like circles and polygons. However, if we consider the base of the cone as a circle, the perimeter would be the circumference of the base circle. The formula for the circumference of a circle is 2πr, where r is the radius of the circle. So, the perimeter of a cone would be 2π times the radius of the base circle.
Does a rhombus have four 90 angles?
No, a rhombus does not have four 90-degree angles. A rhombus is a quadrilateral with all sides of equal length, but its opposite angles are equal, not necessarily right angles. The sum of the interior angles of a rhombus is always 360 degrees, so each angle in a rhombus is less than 90 degrees.
What is called lines that intersect to from 90 degree angles?
Orthogonal lines. or
Rectangular intersection.
What is the name of a twelve sides prism?
A twelve-sided prism is called a dodecagonal prism. The prefix "dodeca-" denotes twelve sides, while "gon" refers to a polygon. In geometry, a prism is a polyhedron with two parallel and congruent faces called bases, and its other faces are parallelograms. A dodecagonal prism would have twelve sides, twelve vertices, and twenty-four edges.
What are two examples of a parallel beam of light?
One example of a parallel beam of light is sunlight reaching the Earth's surface, as the rays from the Sun are nearly parallel due to the vast distance between the Sun and Earth. Another example is laser light, which is produced by stimulated emission and consists of highly coherent and parallel rays due to the nature of the laser's construction and operation.
What is a cross section of a cylinder along its length called?
A cross section of a cylinder along its length is called a rectangle. When a cylinder is cut along its length, the resulting shape is a rectangle with a length equal to the circumference of the cylinder and a height equal to the height of the cylinder. The area of this rectangle represents the lateral surface area of the cylinder.
What is the perimeter of the rectangle 24cm 18cm?
Well, isn't that just a happy little rectangle! To find the perimeter, you simply add up all the sides. So for this rectangle with sides of 24cm and 18cm, you would add 24 + 24 + 18 + 18 to get a perimeter of 84cm. Just imagine that perimeter as a lovely border framing your beautiful rectangle painting!