Temperature

50 degrees Celsius = 122 degrees Fahrenheit

neither, it's cool.

but that's also wrong because it depends where you live.

If you're talking about electrical conductance of a wire, I think increased temp means decreased conductance. Because the metal atoms vibrate faster with increased temp, so the electrons collide with the atoms more frequently, therefore find it more difficult to get through the wire

98 degrees Fahrenheit is equal to 36.7 degrees Celsius.

175 degrees Celsius is equal to 347 degrees on the Fahrenheit scale.

The conversion formula is

Fahrenheit temperature = (9/5 x Celsius temperature)+ 32

Waiting for the thermometer reading to stop changing ensures an accurate and stable temperature measurement, preventing any potential error due to fluctuations in the reading. This practice helps to obtain a reliable and precise result for the patient's temperature assessment.

When taking a temperature by ear with an ear thermometer, typically you should add around 1 degree Fahrenheit (or 0.5 degrees Celsius) to the reading to get a more accurate reflection of the body's core temperature. This adjustment is necessary because ear temperatures can be slightly lower than core body temperature.

Milk is pasteurized at temperatures exceeding 78 degrees Celsius to ensure harmful bacteria are effectively killed. Pasteurization helps to improve the safety and shelf life of milk by reducing the microbial count while preserving its nutritional content.

Monitoring a drive's temperature is important to prevent overheating, which can lead to data loss, decreased performance, and reduced lifespan of the drive. By keeping track of the temperature, you can take necessary steps to prevent potential hardware failures.

18 degrees S and 32 degrees E is located in the country of Mozambique in southeastern Africa.

27° Celsius = 80.6° Fahrenheit.

192C is 377.6 degrees Fahrenheit.

Temperature must be in Kelvin when using Charles's law, as it is a gas law that states that the volume of a gas is directly proportional to its absolute temperature when pressure and amount of gas are constant.

No, 8 degrees Celsius is actually warmer than 2 degrees Celsius.

Yes, for water at 60 degrees Fahrenheit to boil, it must first absorb sensible heat to reach its boiling point of 212 degrees Fahrenheit. Then it must absorb latent heat to undergo the phase change from liquid to gas. This process of absorbing both sensible and latent heat is necessary for the water to transition from a liquid state to a gaseous state.

Yes, 18°C is 64.4°F, and 65°F is 18.33°C

Freezing cold temperatures in the US are generally considered to be below 32 degrees Fahrenheit (0 degrees Celsius). However, this can vary depending on the region and the typical climate of that area.

When matter is heated to extreme temperatures greater than 10,000 degrees Celsius, it typically undergoes changes such as ionization, where atoms lose their electrons, leading to the formation of a plasma state. This extreme heating can also cause matter to emit light across various wavelengths, which is often observed as a glowing or incandescent effect. Additionally, at such high temperatures, chemical bonds within the matter can break down, leading to further dissociation and recombination of atoms and molecules.

To convert temperatures in degrees Celsius to degrees Fahrenheit

[°F] = [°C] × 9⁄5 + 32

To convert temperature in degrees Fahrenheit to degrees Celsius

[°C] = ([°F] − 32) × 5⁄9

The specific heat capacity of water between 25 C and 100 C is 4.1813 J / (g*K).

Beyond 100 C, the heat capacity of water is 2.080 J / (g*K)

So, it take 4.1813 joules of energy to heat 1 gram of water 1 degree Celsius (Kelvin).

Therefore, in order to heat 22 g of water from 25 C to 100 C (75 C), it would require:

4.1813 * 22 * 75 = 6899.145 J

And, to heat 22 g of steam from 100 C to 125 C (25 C), it would require:

2.080 * 22 * 25 = 1144 J

The combined amount of energy required would be:

6899.145 + 1144 = 8043.145 J

You can find the user guide for the Braun Thermoscan ear thermometer IRT4520 on the Braun website under the product support section. You can also check the packaging of the thermometer or contact Braun customer service for assistance.

The heat required to evaporate 1 liter of water at 100 degrees Celsius is known as the latent heat of vaporization of water, which is approximately 2260 kJ/kg. Since the density of water is about 1000 kg/m³, the heat required would be around 2260 kJ.

43 degrees Fahrenheit is approximately 6 degrees Celsius. You can convert Fahrenheit to Celsius using the formula: (Fahrenheit - 32) x 5/9.

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about -459.67 degrees Fahrenheit.