Digital Television

Whether you need a digital converter box for a Sony Trinitron depends on the model and the type of signal you're trying to receive. If your Trinitron is an older model that only supports analog signals, you will need a digital converter box to receive over-the-air digital broadcasts. However, if your Trinitron has a built-in digital tuner, it may not require a converter box. Always check your specific model's specifications to be sure.

No, an ATSC/QAM tuner card will not work with PAL broadcast signals in Australia. ATSC (Advanced Television Systems Committee) is primarily used in North America, while PAL (Phase Alternating Line) is the standard used in Australia and many other countries. To receive PAL signals, you would need a tuner specifically designed for PAL broadcasts.

A box set in theater refers to a type of stage set design that depicts a realistic interior space, typically featuring three walls and a ceiling, resembling a room. This design allows for detailed and immersive environments, often with furniture and decor that enhance the storytelling. Box sets are commonly used in plays to create a sense of intimacy and realism, allowing audiences to feel as if they are part of the action within the depicted space.

Akura televisions are manufactured by Akura Electronics, a company based in South Africa. They specialize in producing a variety of consumer electronics, including televisions, with a focus on affordability and quality for local markets. Akura aims to provide budget-friendly options while incorporating modern technology in their products.

To find out what channel the San Francisco 49ers are playing on today, you can check your local TV listings or sports networks like CBS, Fox, or ESPN, depending on the game's broadcast rights. Additionally, streaming services and apps like NFL Game Pass or the Yahoo Sports app may also provide live coverage. Make sure to verify the time and channel closer to game time, as they can vary by location.

If you're receiving ITV1 but not ITV Wales on your digital receiver, it may be due to your location and the specific transmitter you are connected to. ITV channels can vary by region, and your receiver may be set to pick up the nearest transmitter that broadcasts ITV1 without including regional variations like ITV Wales. You can try retuning your receiver or checking your settings to ensure it's set to receive the correct regional channels. If you're in a different region, you may need to use a different transmitter or check for availability in your area.

Showcase is typically available on Shaw TV as part of its cable lineup, but the exact channel number can vary by region. To find the specific channel for Showcase in your area, it's best to check Shaw's official website or refer to your local channel guide.

clearly there is not - as I am still looking for one. all you get are these "in general" you should get one. in general se hol!!!! If anyone knows the exact universal make and brand that works please spread the news. I would be forever greatful

No, Sleep mode cannot be set on a Dish remote for a TV. The Dish remote is primarily designed to control the functions of the Dish receiver and not the TV itself. Sleep mode settings are typically found within the TV's own menu options or settings. To activate Sleep mode on a TV, you would need to access the TV's settings directly using the TV remote or buttons on the TV itself.

The amount of electricity consumed by a 42-inch LCD TV can vary based on factors such as the model, age, and settings. On average, a 42-inch LCD TV consumes around 80-150 watts per hour. To calculate the daily electricity usage, you would multiply the wattage by the number of hours the TV is on. For example, if the TV consumes 100 watts per hour and is on for 5 hours a day, it would use 500 watt-hours or 0.5 kilowatt-hours per day.

Oh, dude, Silo LCD TVs are manufactured by Silo Electronics. I mean, it's right there in the name, isn't it? Like, Silo makes Silo TVs. It's not rocket science, but hey, if you needed confirmation, there you go.

Videocon was originally founded by Venugopal Dhoot in 1986. However, due to financial difficulties, the company faced insolvency proceedings and ownership has since been transferred to various creditors and investors as part of the resolution process. As of now, the ownership of Videocon is held by a consortium of lenders and investors who have acquired stakes in the company through the insolvency proceedings.

To receive antenna reception, an old TV typically needs an external antenna, which can be either an indoor or outdoor type, depending on the reception quality required. Additionally, if the TV does not have a built-in digital tuner, a separate digital converter box is necessary to decode digital signals. Finally, proper connection using coaxial cables between the antenna, converter box (if applicable), and the TV is essential for optimal reception.

Cielo TV codes for a DirecTV remote can vary depending on the specific model of the remote and the TV. To find the correct code, you can consult the DirecTV remote programming guide or visit the DirecTV website for a list of codes. Typically, you would need to enter the code using the remote's number pad to pair it with your Cielo TV.

I think so...my digital cable box was REALLY warm to the touch. When I turned my TV on it played a few minutes then went out. We have had digital cable for about 5 years and no problem...but then the box never was hot either. I think something went wrong in the box and fried my TV. Can't prove it...but my TV was fine until the box heated up....then it didn't work anymore.

6 MHz wide, analog was at 179.75 Mhz for the audio.

starsatsrx95usb

The Factory code number is 0 0 0 0 If the code has been changed, You can select to reset it using the Setup Code either under the channel blocking or setup code section. Once there, Press 0 7 1 1 You will be given a message "INCORRECT ACCESS CODE" Press 0 7 1 1 on the remote again Next, "enter your new access code" shows on screen. Now you can enter a new 4 digit code. (write it down somewhere)

February 17, 2009. However, most TV stations will have the options of leaving their analog transmitters for a while longer, if they so choose. How long? Not known, yet, but most will probably shut them off for simple reasons of economics.

The Taiwanese that bought the Admiral company

Both analog and digital tuners are likely to be incompatible with British broadcasts but if the television is to be used with a satellite or cable receiver then it is quite possible.

Check the following features:

Does the television handle 230V power supply. An information label on the cabinet will show the voltage range it accepts.

Does the television handle PAL 50Hz standard definition signals? The specification section of the manual may have the information.

Does the HDMI input support 50Hz signals at 576i, 720p, 1080i and 1080p resolutions? If it does, then it will accept British signal formats. Again, the manual may have these formats listed but you may need to contact LG to obtain a definitive answer. However, it is an unusual question to ask so don't be surprised if even the manufacturer doesn't have the answer.

In these days of ever lower prices for television equipment, the cost and effort to ship a television across the Atlantic is likely to outweigh any benefits.

Vizio VA19L has a digital tuner in it.

Japan

Try turning your tv off and then 5 seconds later turn it back on. Normally works for my tv.

There are a couple of ways to do it though I would recommend one over the other. The satellite box will have RCA connections on the back, yellow red and white. Take those to the same color connections on the back of your TV, noting what the input connections are labeled as on the TV so you can select it with your remote. Hook up your antenna to the RF/Coaxial In connection In the menu of your TV, select "Off-Air" or "Broadcast" for the coax connection and do a channel search/save. If you want to watch something off your sat box, just select what input you hooked it up to in the back. This question was answered with the assumption that your TV has RCA connections, most do, but if not then re-post with specifics/progress etc.