Dish Network

No, Sleep mode cannot be set on a Dish remote for a TV. The Dish remote is primarily designed to control the functions of the Dish receiver and not the TV itself. Sleep mode settings are typically found within the TV's own menu options or settings. To activate Sleep mode on a TV, you would need to access the TV's settings directly using the TV remote or buttons on the TV itself.

We do not have a timer option on the remote to place the receiver in sleep mode. The only timer options are for setting up recordings for movies and programs. Sleep mode can be setup for you TV but not the DISH receiver.

Well, honey, if you want to reach out to Dish Network's corporate headquarters, you can send your love letters and complaints to 9601 S Meridian Blvd, Englewood, CO 80112. Just make sure to address it to the bigwigs over there and maybe they'll actually listen to what you have to say. Good luck, sweetie!

The location is based on your area. The options are listed below!

For AZ, CA, NV, and WA customers:

Los Angeles

P.O. Box 7203

Pasadenca, CA 91109-7203

For IL, IN, IA, KS, MI, MN, MO, NE, PA, SD, WI customers:

Chicago

Dept 0063

Palatine, IL

60055-0063

For all other states:

Atlanta

P.O. Box 105169

Atlanta, GA

30348-5169

If you have Dish Network as your satellite provider and you are looking for the TBS channel, simply go to channel 139 and you'll be able to view TBS. Another Turner owned channel is located next to TBS as TNT is channel 138.

"Hoarders" airs on the A&E network, which is typically on channel 118 on Dish Network. However, channel numbers may vary depending on the specific location and package. To find the exact channel for A&E on Dish Network in your area, you can use the on-screen guide or check the channel lineup on the Dish Network website.

In Arkansas, The CW is typically found on channel 20 on Dish Network. However, channel numbers can vary based on your specific location within the state, so it's advisable to check your local Dish Network channel guide for the most accurate information.

Well, honey, if you're looking for some good ol' America's Funniest Home Videos on Dish, you can catch it on channel 196. So grab your popcorn and settle in for some hilarious mishaps caught on camera. Just don't blame me if you end up snorting with laughter!

You build an electronic device to control a transistor switch that causes a mechanical device to push the switch. Now days we bypass the mechanical switch and the circuit can do the switching.

Hi,

No, a receiving dish is used to capture signals only. However, by increasing the circumference you can increase the received signal. However, you're also dealing with a concaved surface and the receiving portion of the dish assembly, usually called an LNA (low noise amplifier) or an LNB (low noise block) would have to have its length from the center of the dish extended to maintain its focal point.

Hope this helps,

Cubby

You will be able to find Ovation on channel 157 with DISH Network, this channel will be found in our America's Top 200 package as well as our America's Top 250 package and America's Everything Pack.

The Twilight saga movies may be available for on-demand viewing on Dish's video on demand service, depending on their current catalog. You can also check if they are playing on any movie channels included in your Dish subscription. Alternatively, you can rent or purchase the movies through Dish's pay-per-view service.

It all depends upon what DISH package you have. There are alot of music channels available on dish: channels 923 - 981 , channels 6001 - 6084.

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology!

cutt.ly/Mh2kgvK

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology! cutt.ly/oh42ktR

Depends on where/how it is installed. If it is a wood, or metal pole, you should either dig up the pole (hard), or dig down around a couple inches and cut it off below grade. If it is a metal pole, use a sledgehammer to smash down the pipe so if the dirt wahes away no one will step on it. For a roof mount, 1st remove the dish, support arm from the foot plate. You will need 2 7/16" wrenches, or a wrench and soket/ratchet. Where the mount "arm" meets the foot plate there are 2 slider carriage bolts with 7/16" nuts used for leveling. Reome nuts and bolts. In the center of the arm is a bolt that runs through the sides of the footplate and the arm. Remove this as well. LEAVE THE FOOTPLATE INTACT. You don't want to break the seal with the roof. Remove the footplate when you have replacement shingles.

It can be done, but why? In fact, it's possible to connect several dishes together, but you need support electronics and signal phasing systems. How 'bout this instead? Use a larger dish, or a dish enlargement extension kit? Trust me, it'll be a LOT cheaper and less troublesome if you do. The more signal you can capture (by the size of the dish) and focus into the LNB, the better the signal. In reality, the real size of a Ku band dish is 5 meters, and you'e most likely got an 18" dish. In this case, bigger is better.

I have beautiful old white stoneware that the finish has worn off of. Now they show gray marks from eating utensils every time I use them. I have cleaned them all up from the marks and am wondering if it is possible to re-glaze them so that they would be protected from re-marking. I am not interested in changing them, just replacing the protective clear glaze.

The local channels vary by where you live, but are usually located in the lower number channels (2-30).

No, there is a receiver in between.

An LNB is a 'Low Noise Block'. The 'block' refers to a block of frequencies (not a magic box).

It is a low noise amplifier and converter. It changes the microwaves from the satellite signal, to a different, lower frequency that the satellite receiver can handle.

A voltage is usually put on the coax from the satellite box. This selects whether the polarized signal received by the LNB, is horizontal or vertical.

If you have DISH Network you will be able to find Teen Nick on channel 181.

If you are referring to the monthly cost it would be dependent upon what type of receiver for example; high definition or standard definition, DVR capability or no DVR, single receiver or duo receiver. Currently, the charge for a additional receiver based upon capability, can cost any where from $7/mnth up to $17/mnth.

To change the mode on your receiver, on the front panel of the receiver is a 'Mode' button. Press that to change the receiver between Single and Dual mode.