Dodge Journey

Hook the cables to the jump start posts under the hood. They are labled with a + and -

Inside the fender, in front of the left front tire.

If equipped it will be located behind the glove box door.

you need a speical tool a caliper adjuster tool. from auto zone

On the new V6 Pentastar it is located on the TOP left side of the engine.

There is an access port in the engine cover that is clearly marked.

For a 2016 Dodge Journey, the recommended oil type is SAE 5W-20 for most engine options. It's important to use a high-quality oil that meets the specifications set by the manufacturer, such as API certification. Always check the owner’s manual for any specific requirements or recommendations based on your engine type and driving conditions.

To see if a coil is bad in a 2012 3.6 Dodge Journey; take the spark plug out, hook it up to the spark plug wire and try and roll over the motor by starting it. If there is no spark it is bad, if there is spark you are fine. Or you can take it to a Auto Parts Store and have it tested. Remember; if you replace one coil, replace them all. Otherwise you will burn all of them up with one coil burning hotter than the others.

five year, HOAT type.

The gas tank on the 2009 Dodge Journey holds 20.5 gal..

The 2014 Dodge Journey has 36.1 in. of rear leg room.

The EPA mileage estimate for the 2012 Dodge Journey is 19 mpg in the city, 26 mpg on the highway.

The 2009 Dodge Journey has a 2.4 L base engine size.

The 2009 Dodge Journey has 56.9 in. of rear shoulder room.

Inside the fender, in front of the left front tire.

If equipped, it is behind the glove box.

By testing to see which one has failed.

By testing to see which one has failed.

Its 15/16 in. Found it on a Dodge forum. I have a 2012 journey with the 3.6 L ENGINE. Just tried it. The 15/16 is correct. If you have the 4 cyl. engine its different

under the car,behind spare tire,is the wiring harness with access plug for dodge trailer harness (optional) my came with 2012 journey

It is directly behind the engine in the middle of the engine compartment. It's located just next to the firewall right below the hood cover.

According to the owner's manual for 2009 on pages 464-65:

(1) open the liftgate

(2) remove the two fasteners from the inboard side of the taillight housing.

(3) insert a trim stick between body panel and outboard side of the taillight housing with one hand and grasp the flange on the inboard side of the taillight housing with the other. use the trim stick and hand pressure together to disengage the taillight housing from the vehicle.

(4) rotate the bulb's electrical connector 1/4 turn counterclockwise (lefty loosey) and remove it from taillight housing.

(5) remove the bulb from the connector socket and install replacement bulb.

(6) install the bulb and connector assembly into the taillight housing and rotate the connector 1/4 clockwise to lock it in place

(7) reinstall the taillight housing and fasteners.

one

Song playing on 2012 Dodge Journey Commercial is Never Quit Loving You by Jill Barber.