answersLogoWhite

0

🧩

Firearms

Values are based on the actual condition of the firearm and whether any modifications have been done to it, such as re-bluing or drilling and tapping for scope mounts, etc. Condition depends on how much of the original finish (stock and metal) is remaining and if there are any dings, dents, scratches, etc on it. It's really best to take the firearm to someone local or to a gun show for an estimate of worth.

32,246 Questions

Will a 357 mag shoot in a 38 special?

Yes, a .357 Magnum cartridge can be fired in a revolver chambered for .38 Special, as the .357 Magnum has the same dimensions as the .38 Special but is longer. However, it's important to note that .38 Special ammunition cannot be safely fired in a gun designed only for .357 Magnum, as it could lead to potential malfunctions or safety issues. Always ensure the firearm is appropriate for the ammunition being used.

What is Rifling in the bore of small arms is designed for?

Rifling in the bore of small arms is designed to impart spin to the projectile as it travels down the barrel. This spin stabilizes the bullet in flight, improving accuracy and range by reducing the effects of aerodynamic drag and wind. The helical grooves, typically cut into the barrel's interior, help ensure a more stable trajectory, allowing for greater precision in shooting. Overall, rifling enhances the effectiveness of firearms in hitting targets accurately at various distances.

How do you mount scope?

To mount a scope, first, ensure you have the correct rings and bases for your rifle. Start by attaching the base to the rifle's receiver, using the appropriate screws and torque specifications. Next, place the scope in the rings, adjusting its position for proper eye relief and alignment. Finally, tighten the ring screws evenly to secure the scope in place, ensuring it is level before finishing.

What are the production dates of the Winchester 1894 model 30 wcf?

The Winchester Model 1894, chambered for the .30 WCF (also known as .30-30 Winchester), was first produced in 1894. Production continued for many decades, with significant numbers produced until the discontinuation of the original model in 2006. Throughout its production run, there were various iterations and changes, but the .30-30 caliber became one of the most popular and enduring cartridges associated with this rifle.

Where is the serial number found on moneygram receipt?

The serial number on a MoneyGram receipt is typically located at the top or bottom of the receipt. It is usually labeled as "Reference Number" or "Transaction Number." This number is important for tracking the transaction and should be kept for your records. Always check the receipt carefully to ensure you have the correct number for any inquiries or follow-ups.

Do 22 long bullets fit a davis model dm-22 cal 22 mag?

Yes, the Davis Model DM-22 is designed to accommodate .22 Magnum cartridges, and 22 long bullets should fit as they are of similar caliber. However, it's essential to ensure that the specific ammunition you are using is compatible with the firearm. Always consult the owner's manual or a knowledgeable gunsmith for guidance to ensure safety and proper function.

What is the value of a E Allen vest pocket derringer cal. .22?

The value of a E. Allen vest pocket derringer in .22 caliber can vary widely based on factors such as its condition, rarity, and historical significance. Generally, prices can range from a few hundred to over a thousand dollars. For an accurate appraisal, it's best to consult a firearms expert or check recent sales for similar models.

How do you use a rangefinder reticle scope?

To use a rangefinder reticle scope, first, identify the target and ensure it is within the scope's field of view. Align the reticle with the target and use the markings on the reticle to estimate the distance based on the known size of the target. For example, if you know the height of the target, you can compare it to the reticle's measurements to determine range. Finally, adjust your aim or rifle settings based on the calculated distance for accurate shooting.

How often do state cops need to calibrated their radar guns?

State police radar guns typically need to be calibrated regularly to ensure accurate speed readings. Calibration frequency can vary by state and department policies, but it's generally recommended to calibrate the devices at least once a month, or before any significant use, such as during traffic enforcement operations. Additionally, officers often perform a self-check before each shift to ensure the radar is functioning correctly. Regular maintenance and adherence to manufacturer guidelines are crucial for maintaining accuracy in speed measurements.

What component holds the firing pin and extractor?

The component that holds the firing pin and extractor is typically the bolt in a firearm. The bolt is responsible for chambering the cartridge, locking it in place, and facilitating the firing process. It contains the firing pin, which strikes the primer of the cartridge, and the extractor, which removes the spent casing after firing.

What do you need in a setting description?

In a setting description, you need to convey the physical characteristics of the environment, including details like location, climate, and time period. Sensory elements such as sights, sounds, and smells help immerse the reader in the scene. Additionally, the mood or atmosphere should be established to reflect the emotional tone of the narrative. Finally, any relevant cultural or historical context can enrich the setting further.

What is the value of a German made derringer RG 17 38 special serial number 39358?

The value of a German-made RG 17 .38 Special derringer can vary widely based on factors such as its condition, market demand, and specific features. Generally, these firearms may range from $100 to $300, but prices can be higher for well-preserved or collectible models. To get a more accurate estimate, it's advisable to consult recent sales or a firearms appraisal expert.

Is there a parts list available for a flexible shaft rotary tool Model No 572.251471?

To find a parts list for the flexible shaft rotary tool Model No 572.251471, you can check the manufacturer's website or contact their customer service directly for assistance. Additionally, online retailers or parts suppliers may have the information you need. If the tool is discontinued, forums or user groups may also provide insights or resources.

Why does my 700 7mm Rem mag bolt jam after the shot?

A jammed bolt on your Remington 700 7mm Rem Mag after a shot can be caused by several factors. Common issues include ejector or extractor problems, which can prevent the spent casing from being properly ejected. Additionally, if the chamber is dirty or if the ammunition is out of specification, it can lead to feeding issues. Lastly, check for any signs of excessive pressure or a sticky bolt due to fouling or inadequate lubrication.

What is the value of a sako 222 LR?

The value of a Sako .222 LR can vary significantly based on factors such as model, age, condition, and any modifications or accessories included. Typically, prices can range from around $600 to over $1,200. Collectible or rare models may fetch higher prices among enthusiasts. For the most accurate valuation, it's advisable to consult recent sales data or a firearms appraiser.

Does anybody have a revelation model 160 22 caliber for sale contact 910 220 7918?

I'm sorry, but I can't assist with finding or facilitating the sale of firearms. You might consider checking local classifieds, online marketplaces, or firearm-specific forums for listings. Always ensure that any transactions comply with local laws and regulations.

What is the serial numbers for case 4-390 engines?

The serial numbers for Case 4-390 engines typically start with the prefix "D," followed by a series of numbers that indicate the engine's production sequence. To find the specific serial number for a particular engine, refer to the engine's identification plate or documentation, as these can vary by year and production batch. For the most accurate information, consulting a Case engine manual or contacting a Case dealer would be advisable.

What is the manufacture date of an H and R 929 with serial number 031907?

The H&R 929 revolver was manufactured by Harrington & Richardson from the late 1970s to the early 1990s. To determine the specific manufacture date for the serial number 031907, you would need to consult H&R's serial number records or reference guides, which may provide a more precise date based on the serial number range. Unfortunately, without access to those records, I cannot provide an exact date.

What did a Davis 22 lr derringer cost new?

The Davis .22 LR Derringer, when it was first introduced in the 1990s, typically retailed for around $50 to $100, depending on the specific model and retailer. Prices could vary based on factors such as the location and any special features. Today, used models can often be found in a similar price range, depending on their condition and market demand.

Capability forecasting uses data from pre published schedules and amendments and prepares a?

Capability forecasting uses data from pre-published schedules and amendments to prepare a projection of resource availability and operational capacity. This process helps organizations anticipate future demands and align their resources accordingly. By analyzing historical data and trends, businesses can optimize their planning and enhance decision-making, ensuring they meet customer needs effectively. Ultimately, it allows for better strategic planning and resource allocation.

How many model 70 were made in 7x57 mauser?

The Winchester Model 70 in 7x57 Mauser was not as commonly produced as other calibers. While exact production numbers for the 7x57 variant specifically are not easily available, it is generally recognized that the 7x57 Mauser was offered as a chambering option primarily during the pre-64 era. Overall, the Model 70 has seen millions of units produced across various calibers since its introduction, but specific numbers for the 7x57 Mauser are limited and often not well-documented.

What is cz license?

A CZ license typically refers to a firearms license issued in the Czech Republic, allowing individuals to legally own and carry firearms. The license requires applicants to meet specific criteria, including background checks, safety training, and medical evaluations. There are different types of CZ licenses, such as for sport shooting, hunting, or personal protection, each with its own regulations. This license reflects the Czech Republic's relatively liberal gun ownership laws compared to many other European countries.

How do you disassemble a ruger p85?

To disassemble a Ruger P85, first ensure the firearm is unloaded by removing the magazine and checking the chamber. Next, pull the slide back slightly, and then push down on the takedown lever located on the left side of the frame. Once the lever is down, release the slide forward and gently lift it off the frame. You can then remove the recoil spring and barrel for further disassembly or cleaning.

Why do you have so much advertising on your site that it is so slow that its not worth my time?

I apologize for any inconvenience caused by the advertising on our site. Ads are essential for funding our content and services, but we understand they can impact performance. We're continually working to optimize the site to improve loading times and enhance user experience. Your feedback is valuable and helps us make necessary adjustments.

How much kcalories equal cal?

1 kilocalorie (kcal) is equal to 1,000 calories (cal). Therefore, to convert kilocalories to calories, you multiply the number of kilocalories by 1,000. For example, 5 kcal would equal 5,000 cal.