Glue and Adhesives

At first I thought it was because of the salts coming in contact with the glue that caused the color change. Then I wondered if the heat from the candles inside the jars were causing the discoloration. That theory was shot down when I noticed some other projects I made that had no contact with heat had also turned white. As it turns out, over time the moisture from inside the salt crystals actually evaporates, leaving the chalky looking dry white salt. This would explain why epsom salt remains crystalized while inside its sealed package.

Inhaling glue is extremely dangerous and can lead to serious health issues including damage to the brain, lungs, and central nervous system. If someone is struggling with substance abuse or addiction, it's important to seek help from a medical professional or counselor immediately.

Super glue is not intended to be used to get high. Inhaling the fumes of super glue can lead to a range of harmful effects, including dizziness, headaches, and respiratory issues. It is important to use super glue in a well-ventilated area and follow safety guidelines to avoid any negative health effects.

The density of a hot glue gun stick can vary depending on the type of material it is made from. On average, the density of a hot glue stick is around 0.9 to 1.2 grams per cubic centimeter.

Different glues have different boiling points

That is a very vague question and almost impossible to answer. It's necessary to know WHAT glue and on WHICH material. I wouldn't the same remover universally. If i get ABS yellow glue on a cotton blend shirt, i remove it with Whitlam's Glue wash - This will not work for most other things. If I get white glue on a T-shirt, hot soapy water often works.
- You need to re-write and specify glue and material.

The main ingredient in a glue stick is typically a type of polymer resin (e.g. polyvinyl acetate) that provides the adhesive properties. Other ingredients can include wax, tackifiers, and fillers. Latex is not usually used in glue sticks as it is more commonly found in liquid adhesives like white glue.

To glue wood to wood, apply a thin, even layer of wood glue to the surfaces you want to bond. Press the pieces together firmly and then clamp them in place until the glue dries, following the instructions on the glue bottle. Allow the glued wood to cure for the recommended time before handling it to ensure a strong bond.

If glue has hardened and dried out, you can try heating it with a hairdryer to soften it. Another option is to soak the area in warm soapy water to loosen the glue. If these methods don't work, consider using a solvent like acetone or rubbing alcohol to dissolve the glue.

Sticky keys is a feature in operating systems that allows users to perform keyboard shortcuts by pressing one key at a time, instead of simultaneously. It is helpful for individuals with disabilities who may find it challenging to press multiple keys simultaneously.

Ointments are solid or semisolid adhesive masses that prolong contact at the site of application. They are used to deliver medications topically to the skin or mucous membranes for localized effects. Ointments provide a barrier that helps retain moisture and enhance the penetration of the active ingredients.

It must be at a suitable temperature. The surfaces to be glued must be clean and grease free.

Which glue - there are hundreds. Please be specific about things like that.

An epoxy adhesive designed for metal surfaces is typically the best choice for bonding metal to metal. Epoxy adhesives provide strong and durable bonds that are resistant to high temperatures and can withstand heavy loads. Be sure to prepare the surfaces to be bonded properly for the best results.

Glue can unstick due to factors such as moisture, heat, or chemical solvents. These elements can weaken the adhesive properties of the glue, causing it to lose its bond and become unstuck.

Pipe ends and fittings should be cleaned and abraded using a solvent cleaner and sandpaper to ensure a clean and rough surface. This helps the adhesive bond properly and create a strong connection. It is important to follow the manufacturer's instructions for the specific adhesive being used.

Many things are soft and sticky - a child's semi-chewed toffee is notoriously sticky.

The only way to answer this is to know the size of the glue bottle.

To remove hair glue from clothes, you can try applying a small amount of rubbing alcohol or nail polish remover onto the affected area and gently rubbing it in. Let it sit for a few minutes before rinsing with warm water. Repeat the process until the glue is completely removed.

Super glue can peel off a nail if soaked in warm, soapy water and gently scraped with a nail file. It is important to be cautious and avoid damaging the nail while removing the glue.

To separate metal from wood glue, you can use mechanical methods such as scraping or sanding to remove the glue residue from the metal surface. Alternatively, you can use a solvent appropriate for the type of glue used, such as acetone for certain wood glues, following safety precautions and manufacturer instructions.

To soften Elmer's glue, you can place the bottle in a bowl of warm water for a few minutes. The heat from the water will help to loosen up the glue and make it easier to work with. Remember not to heat it too much as it may affect the glue's effectiveness.

The pot life of an adhesive refers to the amount of time after mixing when the adhesive is still workable. It is important to adhere to the specified pot life to ensure proper bonding and performance of the adhesive. Once the pot life has elapsed, the adhesive may begin to cure or harden, making it difficult to use.

Mixing glue, Clorox (bleach), and Gain (laundry detergent) is not recommended as it can produce toxic fumes that can be harmful if inhaled. It is important to always read and follow safety instructions on product labels and avoid mixing household chemicals together.

Cyanoacrylate of any kind is NOT made to work on porous material like concrete. So it is unlikely to stick anything adequately. There is a large variety of other much more suitable glues to stick different materials to concrete.


It may take ages, because krazy glues are NOT meant to work on porous surfaces.