0
Locks and Latches
Locks and latches are parts of a door. While the latch ensures that the door stays in a closed position to prevent it from opening, lock prevents the door from being opened without a matching key.
2,075 Questions
How do you open a door lock with a card?
Slide the card through the slot where the lock is by the door. Set the card where the lock would be. Now open the door.
What are tools that locksmiths use?
well you need get the certification so you don't get into legal trouble for having opening tools, but tools used are lock picks of all types short hook, rake picks, snake picks are most common pistol picks auto tools are long reach tools pump wedge, jiggler keys, and many others but again get the certification if you don't use at own risk.
How do you reset the combination of a Lewis Clark combination lock?
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Position the lock so if you're looking straight at it, the lock is set on it's large flat side, with the combo numbers on the right side and the n-shaped clasp open on the left. 2) Pull the clasp straight up and rotate it counter clockwise 180 degrees and press it down. 3) While holding the clasp down at the 180 degree location, dial in your new combo. 4) After the new combo is set, release the downward pressure on the clasp, continue rotating it counter clockwise to the lock position and you're done.
Which key does not open any lock?
A donkey, monkey, turkey, piano key, keychain, or Key West. It's a play on the word key.
Is it legal to carry a lock picking set in Michigan?
I'm a certified locksmith, but each state is different, so check your state laws, but have your credentials, if you are a locksmith or other allowed to have these tools. to have them is not illegal itst if you get caught with them laws in your state may say you can't but its different for each state if you are unlawfully opening something you should'nt be
How do you open a combination lock without combination?
You have to have a combination. If you have a key lock you don't need a combination, all it is is a lock that says master and a key to turn it and then it opens what you have in it.
Do boys pull all your clothes down and locks the door of your room?
They shouldnt. If they do this, tell an adult
Term used to denotate overconcentration of prison; administrator with security and community protection,to be accomplished through extensive use of locks, head counts and internal control of innmates.
Are locksmith cheaper during the day?
A lot of locksmiths usually have a fixed rate so you should be informed before the job is done. But daytime rates are cheaper than night time emergencies.
How do you get into a car when it is locked and won't open?
You use your key, typically. If it isn't available, then calling a locksmith or your emergency car service (like triple A) is a good idea. Depending on how nice the cops are in your area, one of them might be willing to help as well. They usually use this thing that goes between the window and the side of the car that can reach the lock mechanism... or something that can snake through an open window and get to the lock buttons.
If it isn't your car, of course, then obviously you shouldn't be breaking in at all.
How do you repair handleset thumb latch?
You remove it from the door and find exactly which part is broken,replace that part.
Lock picks is the preferred tool, as they're actually made for such tasks.
How can you open a masterlock without a key?
Master Lock offers a variety of padlocks, U-locks and combination locks. The standard way to open the Master Lock is to insert a key into the keyhole and turn it as you would any other lock. However, it's also possible for you to break open a Master Lock if you don't have the key. This method is good if you need to open the lock quickly, and picking the lock would take too long.
Follows these instructions to open a master lock withou a key :
1. Cut the metal loop off the lock with bolt cutters. Place the bolt cutters around the loop of the lock and apply pressure until the cutters break through the loop.
2. Break a Master Lock U-lock with a hammer. Hit the loop of the lock directly at the curved portion of the loop. By hitting the right spot, the loop can be released from the body of the lock. This may take a few attempts to find the right spot.
3. Break a combination lock with a screwdriver or shim. Pry the numerical dial off the front of the combination lock. Slip the screwdriver or shim under the numerical front and apply upward pressure. Break the center metal piece of the lock. Stick the screwdriver or shim in the hole on the front of the lock and move it around until the metal piece is loose and the loop of the lock releases.
Yes
How do you change the combination on a lock box?
look online to see if you can find out how by typing in the model type. if not, return it to the store
Do you have to be 18year old to buy lock pick?
No, not by law. However, some cities or localities may have additional restrictions on the sale in their jurisdiction.
Many shopkeepers will also refuse to sell to minors on pure principal, which is probably a good idea.
It is legal for a minor to purchase lockpicks on the federal and state level, however.
