Massey Ferguson

The Massey Ferguson 302 typically requires a high-quality hydraulic oil for its manual transmission, often specified as either a UTF (Universal Tractor Fluid) or a specific type of transmission oil recommended by the manufacturer. Commonly, oils meeting the specifications of ISO 46 or 10W-30 are suitable. Always refer to the owner's manual or service guide for precise recommendations and specifications for your specific model.

You can mount a toolbox on a Massey Ferguson 1540 on the rear of the tractor or on the front loader frame, depending on your needs. Ensure that the mounting location does not obstruct operator visibility or access to controls. Additionally, consider using a secure mounting bracket to prevent movement during operation. Always check the tractor's manual for specific guidelines and recommendations.

te 62623

Contact a Massey Ferguson dealer tell them your Model and Serial number. By giving the dealer S/N they can tell you everything about the tractor including engine, horse power and any accessories that came on the tractor from the manufacture. The dealer will probably be able to tell you anything about add-ons by previous owner(s). WIth the S/N they can also tell what wiring bundle was installed on your tractor

according to tractordata.com end of 1963

A Massey Ferguson 165 with a serial number of 9A 96068 was produced in 1971. The "9A" prefix indicates it was manufactured in that year, as Massey Ferguson used specific serial number prefixes to identify the production year of their tractors.

you could find you have left it in the tool box or perhaps it has fallen behind the seat

Either 4.00-19 or 6.00-16, latter was so called option size.

To determine the year of a Massey Ferguson tractor with the serial number 9A 92548, you can refer to the manufacturer’s serial number identification charts. Generally, Massey Ferguson tractors with the "9A" prefix were produced in the early 1970s. Specifically, serial number 92548 indicates that the tractor was likely manufactured around 1972. However, for precise identification, consulting the specific model information and serial number reference guide for that year would be best.

Open battery access door behind steps on left side of tractor. On side of transmission housing is a combined dipstick and fill tube.

1971

sae 90 gear oil. it is 100% mineral oil. napa, car quest, call your local massey dealer they have it. you will pay a little more but they have all the answers.

go to tractor data.com

alternator no output

I just had my MF 202 check by the heavy transport officers in Quebec, Canada.

With the front bucket and the rear backhoe it weight 3900 Kg = 8500lbs.

My rear weels are filled with calcium and the large front bucket on.

mf 202 industrial tractor with Z134 engine is .022

The same place as a massey165

1.) Buy yourself an MF 50 tractor Owner's Manual. Try your local Massey Ferguson dealer or search online. Places like eBay and such are good places to try for used manuals.

2.) Go to Tractor Supply Co. and buy yourself an I&T Service Manual. (They are cheaper than the OEM MF manuals, but are not as comprehensive, and are more geared towards mechanics.)

Also, it depends on what you are talking about.

- The Hydraulic System?

- The Engine? (...and is it a gas or diesel)?

- What climate do you run the tractor in? Cold? Temperate? Hot?

Generically speaking:

- Engine - Regardless of temp, for most climates, you can run 10W-30 in the engine safely, no matter what.

Cold? (0-60 degrees F) 5w-30 or 10w-30 or SAE 10

Temperate? (30-90 deg F) 10w-30 or 10w40 (or 15w-40 if diesel)

Hot? (60-120 deg F) 10w-30 or 15w-40 or SAE 30

- Trans & Hyd - I believe the MF 50 uses a "common-sump" transmission/hydraulic system. Therefore, any good quality modern Transmission AND Hydraulic Fluid can be used. Honestly, even if they were separate sumps, you still could use the same fluid in this case.

Fluids commonly known as:

- TH fluid

- Universal Tractor Hydraulic AND Transmission Fluid

- John Deere's: HY-Gard J20C

- Case IH's: HY-Tran

- Massey Ferguson's PermaTran III (may be a higher roman numeral these days, as I haven't bought "MF brand" oil in a long time)

- and Various other names that most Universal Tractor Transmission & Hydraulic fluids go by.

DO NOT use straight hydraulic fluid or straight transmission fluids. You will not get as good of performance, and you will not have the right additives in your oil for the application.

Your rear axle final drives may be separate from your transmission. I believe they are. For them, a good 80W-90 or SAE 90W oil would suffice.

Kudos! ~AJ

If powered by the Gas engine, at the drawbar, as much as 41 horses can pull.

If powered by the Diesel engine, at the drawbar, as much as 45 horses.

Pull down on the plastic knob located on the front lower area of the grill.

1200kg

The Massey Ferguson 231 tractor typically uses a Universal Tractor Transmission Fluid (UTF) that meets the specifications of MF 1135 or equivalent. It's essential to check the owner's manual for the recommended fluid type and any specific requirements. Using the correct transmission oil is crucial for optimal performance and longevity of the tractor's transmission system.

1969 starting serial number for 1969 9a39863