0
Smith and Wesson
The leading gun manufacturer in the US, Smith and Wesson is a company that provides services and products for security, safety and sport. The company also provides related training to the law enforcement, military and sports markets.
4,780 Questions
Can you shoot 5.56 ammo out of 223 S and W model 1500?
Yes but I would only shoot those loads with a 55gr.bullet or lighter.I believe the smith and Wesson model 1500 has a twist rate that is not made for the heavier bullets found in todays .223 ammo.
How do you take apart a Smith and Wesson model 10?
Smith & Wesson revolvers are not INTENDED to be taken apart by the owners- to clean and maintain the weapon does not require disassembly. Please contact S&W and request an owner's manual- no charge. The cylinder crane and the sideplate cannot be removed except with the use of tools- and the tool must fit properly, or you will certainly damage the screws. The sideplate is made to fit so snugly that prying it to remove will damage it. Would STRONGLY suggest that you take it to a competent pistolsmith if there is a problem with the lockwork. There are spray gun cleaners that can be used to flush dirt or crud from the lockwork without taking the gun apart.
What is the value of a used Smith and Wesson model 58 .41 magnum?
The Smith and Wesson model 58 is a 6 shot N frame revolver in caliber .41 magnum with a four inch barrel and fixed sights.
It is the nickel version of the model 57.
The model 58 is still available from Smith and Wesson.
The condition mostly determines the value of the firearm.
A model 58 in fair to excellent condition might be priced from 250 to 1000 US dollars.
How can you disassemble a Smith and Wesson J K L or N frame revolver?
The Smith and Wesson J, K, L and N frame revolvers share the same basic procedure for disassembly and reassembly.
To disassemble the revolver, first remove the grip screw from the left side of the revolver as the revolver barrel faces to the left.
When the grips are removed the side plate will be fully visible.
Remove the screws from the side plate.
To remove the side plate, hold the revolver to the horizontal position with the side plate facing down. Do not pry off the side plate as that will damage the side plate fit.
Sharply rap the now exposed grip frame with a wood or plastic hammer until the side plate loosens. Continue to rap, and the side plate will fall off along with the hammer block, so be sure it falls on a padded surface.
At this point most internal parts will be visible and accessible.
The cylinder can be removed by sliding the cylinder crane to the left and out of the frame, while holding the cylinder in place.
The cylinder will now be free.
Removal of the extractor rod and extractor will not be described here, but the extractor rod is threaded in reverse to prevent loosening while operating. Caution: The extractor rod assembly is very often damaged in attempts to unscrew it. Also, it is necessary to support the extractor while unscrewing the extractor rod.
To reassemble the revolver, do the above in reverse, making sure the hammer block has been replaced and the side plate seats correctly.
You can tap on the side plate with a wood or plastic tool to seat it properly.
Replace the cylinder crane and cylinder. Be sure the correct screw is used to hold the cylinder crane to the frame.
Replace the remaining side plate screws in the correct place along with the grips and grip screw.
Holding back the hammer slightly, or with the hammer cocked, look in the gap between the hammer and frame to be sure the hammer block has been replaced. If not the side plate must be removed again and the hammer block must be added.
A word of caution here: before making alterations or repairs know exactly what you are doing. Revolvers are delicate and expensive machinery.
How much fps does a 44 magnum have?
How many feet per scond? depends on the laoding of the cartridge, and what it is fired from. For most handguns, between 1300 and 1600 feet per second.
What is the value of a Smith and Wesson caliber 38 model 36 nickel with the original box and tools?
The Smith and Wesson model 36 is a 5 shot J frame revolver with a 2 or 3 inch barrel.
Depending on the condition and age, the revolver may be worth 150 to 500 US dollars.
What is smith and Wesson product code 101251?
To answer your question would take a few days of looking in the Standard Catalog of S&W, 3rd edition
What pistol does leon Kennedy have?
It's a fictional gun designed in the story by the Kendo Custom Shop. Aesthetically, it resembles but is distinct from the H&K USP. In terms of form and functionality, it is closest to the Smith & Wesson Sigma 9VE with certain features from the Ruger P-95.
Where is serial number on forehand and Wadsworth revolver?
Most F&Ws that HAD a serial number had it stamped on the butt- and stamped on the rear of the cylinder. LEGALLY, the one on the butt is the serial number. Many older guns did not have serial numbers, especially lower cost guns.
.38 caliber firearms have been around for a long time- several muzzleloader, and cap & ball revolvers used that caliber (Colt Navy models). The .38 rimfire was created about 1861, and was followed by the .38 Webley, various .38 Colts, S&Ws, etc. The most common .38 cartridge today is the .38 Special (which is actually .357, not .38) It was created by Smith & Wesson in 1899, and is still in production.
I believe you are asking about a S&W 80G not 806. If I'm right it is a C02 BB rifle Brown Plastic stock. It has a sliding wedge level. If this is it, then it was made between 1972-80. In Fair to Good condition it is worth between $60-$80 in Excellent condition it is worth around $105 plus or minus.
What is the differences between a smith and Wesson model 19 and a smith and Wesson model28-2?
The M19 is a medium size K-frame. The M28 is a large size N-frame, which was also used in producing the 41 and 44 magnums.
Can you shoot plus p in the S and W BodyGuard?
Yes, you can but it is NOT recommended. Only shoot +p ammo in .38SPL guns that are marked as +P.
What is the value of a Smith and Wesson 38 lemon squeezer pistol?
Trying to put a value on anything with just the limited information provided is hard to do. Value depends on a combination of many factors. You have only provided the most generic description. Without a detailed description to include, finish, barrel length, overall condition, stock material, sights, box, original paperwork and any accessories, only a general estimate can be given. This weapon could be in the 50-475 USD price range.
Where is the serial number on a smith and Wesson?
On revolvers, they are usually on the butt. They MAY be concealed by the grips.
How do you remove the slide lock pin on the Smith and Wesson Model 59 Pistol?
Ask a gunsmith for help or contact S&W for an owner's manual. You can also download one from their website.
