0
Smith and Wesson
The leading gun manufacturer in the US, Smith and Wesson is a company that provides services and products for security, safety and sport. The company also provides related training to the law enforcement, military and sports markets.
4,780 Questions
What is the value of a Smith and Wesson Model 27 no dash 357 mag circa 1958 VG condition?
ABOUT $400. The pre-war "Registered magnum" with paperwork is worth much more.
What does a smith and Wesson 357 magnum revolver model 13-1 look like?
The Smith and Wesson model 13 chambered for .357 Magnum was introduced in 1974. It is a "K" frame, designating that it uses the medium size smith revolver frame. The "J" frame is smaller and the "L, N and X" frames are larger.
The 1 following the 13 indicates the first issue of the model 13 dating from it's introduction in 1974. The 13-2 was issued in 1977 with a minor change to the cylinder and the 13-3 was issued in 1982 with another minor change.
It looks about like any other revolver from that era:
The 13 is no longer available for purchase, but the model 686 is very similar:
What is the value of a 32 S. and W. long Sn H66313?
Impossible to answer without a detailed description of all features, condition, finish, box, papers, accessories, etc..
How old is your Smith Wesson 357 Magnum K frame serial?
Impossible to answer without the serial number.
How do you disassemble a Smith and Wesson model 66?
The Smith And Wesson model 66 is a 357 magnum caliber, 6 shot revolver of stainless steel construction
To disassemble the revolver, first remove the grip screw from the left side of the revolver as the revolver barrel faces to the left.
When the grips are removed the side plate will be fully visible.
Remove the screws from the side plate.
To remove the side plate, hold the revolver to the horizontal position with the side plate facing down. Do not pry off the side plate as that will damage the side plate fit.
Sharply rap the now exposed grip frame with a wood or plastic hammer until the side plate loosens. Continue to rap, and the side plate will fall off along with the hammer block, so be sure it falls on a padded surface.
At this point most internal parts will be visible and accessible.
The cylinder can be removed by sliding the cylinder crane to the left and out of the frame, while holding the cylinder in place.
The cylinder will now be free.
Removal of the extractor rod and extractor will not be described here, but the extractor rod is threaded in reverse to prevent loosening while operating. Caution: The extractor rod assembly is very often damaged in attempts to unscrew it. Also, it is necessary to support the extractor while unscrewing the extractor rod.
To reassemble the revolver, do the above in reverse, making sure the hammer block is in place and the side plate seats correctly.
You can tap on the side plate with a wood or plastic tool to seat it properly.
Replace the cylinder crane and cylinder. Be sure the correct screw is used to hold the cylinder crane to the frame.
Replace the remaining side plate screws in the correct place along with the grips and grip screw.
Holding back the hammer slightly, or with the hammer cocked, look in the gap between the hammer and frame to be sure the hammer block has been replaced.
A word of caution here: before making alterations or repairs know exactly what you are doing. Revolvers are delicate and expensive machinery.
When was smith Wesson model 65-4 manufactured?
A serial number is needed or you can call S&W and ask.
What is the maximum range of a 40 cal handgun?
Maximum range the bullets will fly and still be dangerous? Probably 2 miles or about 3 kilometers. But if you mean the maximum range that you can expect to hit a man-sized target with just one or two shots, with the bullet still having enough velocity to do what you want it to do to that enemy, then that maximum distance would be about 50 yards or 50 meters.
How do you disassemble a s and w mod 422 for cleaning?
You can download or request a manual via mail from the S&W web site
Take apart smith and Wesson 40 caliber?
Contact S&W for a manual or download one from their site or ask a gunsmith for help
What is the value on a Astra-Cadix 38 revolver 5-shot?
all depends on the condition but seems to be $150 to $350.
You have old smith and Wesson 22 cal 7 shot How old would it be?
Impossible to answer without the serial number and a detailed description of all markings, features, box, papers, accessories, bbl length, finish, condition, etc..
It may be a Ladysmith, made around 1902 to 1922, if it is a seven shot.
What ammunition can you fire in a 38 special?
If it is only listed as .38 Special (spl), use only that ammo. If it is .38 S&W special, use only that ammo. Don't try to mix them. The diameters are not the same. If you still cannot determine the actual cartridge caliber, take it to a gunsmith and have them identify it for you.
What is the value of a Rohn 22 caliber German made revolver model B with a three inch barrel?
no real value. the Rohn is classified as a 'Saturdaynight' special meaning it is not a quality revolver. depending on condition expect $50 - $75
What year did s and w make the model 13 and 13-3 and 13-4 serial?
The information you want can be found in the Standard Catalog of Smith and Wesson by Supica and Nahas
What is the value of a 44 s and w special ctg?
1 .25 - 2.00 USD depending on who made the round.
2. Probably this question refers to the gun as the abbreviation CTG appears on Smith and Wesson firearms indicating caliber and cartridge.
The above is correct for a single cartridge.
A caliber .44 Smith and Wesson revolver can range from 200 to 1100 US dollars depending on condition.
The gun is likely a Harrington & Richardson (H&R) model 925. The caliber is .38 Smith and Wesson (S&W) special, not to be confused with .38 special (SPL). You must shoot the .38 S&W ammo, not .38 spl.
