Volume

To convert liters to grams, you need to know the density of the substance in question. The conversion factor will vary depending on the substance, as different materials have different densities.

1 Imperial gallon is 160 Imperial ounces or 154 US fluid ounces.

That depend on how long the ruler is.

The 2 rulers in my desk drawer have 200 and 300 milimeters markings respectively. I also have a triangle with 195 millimeter markings on one side. I just looked in another drawer and found a ruler with 400 mm markinga and a folding carpenter's rule with 2000 markings.

2990

1 dL=100 mL

29.9 dL=xmL

29.9 x 100 mL= 2990

4 US fluid ounces = 118.29 ml

.5 US gallons = 2 US quarts

The amount of water used to water a garden depends on the size of the garden, the type of plants, and the frequency of watering. On average, a garden may use 2-3 liters of water per square foot each time it is watered.

25 ml of water is equivalent to 25 grams since the density of water is 1 g/ml.

2.8 cubic feet is about 21 gallons.

There are 1000 ml in a liter, so:

1.75 liters x 1000 ml/liter = 1750 ml

To do other conversions:

1 liter is equal to:
1000 mililiter (ml)
100 centiliter (cl)
10 deciliter (dl)

This is a badly phrased question. 3 cc = 3ml. a millilitre is a centimetre cubed and that is exactly what cc means. if the syringe takes a max of 3ml, then 3.125 is a full syringe and a 1/24th of a syringe

64 tbsp

1 cup = 16 tablespoons

1 tablespoon = 0.06 cup

There are 0.9 US quarts, and 1.06 US liquid quarts in 1 litre.

The size of a mixer can vary widely, but a typical portable concrete mixer can hold around 0.2 to 3 cubic meters of material.

15.78947368, the same as in your other question.

There are 295.74 drops in 0.5 fluid ounces.

Yes, 64 oz is equivalent to approximately 1.8927 liters, so it is less than 2.2 L.

4 qts. 3 cups.

1 quart = 4 cups And 1 cup = 0.25 quart.

There are 32 US fluid ounces (2 pints, or 4 cups) in 1 US quart (946.4 ml).

There are 40 Imperial fluid ounces (2 pints) in 1 Imperial quart (1,136 ml).

Note that there is no 'cup' in the Imperial system, it is best to use pints or half pints, and not 'cups'.

There are 4 quarts in a gallon. So 50 quarts would be 12.5 gallons.

7 ml of water is approximately 1/2 a tablespoon.

I will assume that you are talking about a 42 gallon barrel of pure water at 60 F.

m = ( d ) ( V )

m = ( 8.338 lbm / gal ) ( 42 gal ) = 350.2 lbm <--------------

16 ounces of water is equal to approximately 0.473 liters.

750ml, which is the amount of fluid in a typical wine bottle, equals about 26 ounces.

If you are serving at a wine tasting, and you serve one-ounce pours for comparing wines, and use a one-ounce pourer (that limits pours to one ounce each), you can in theory serve 26 people. However, due to inaccuracies in the pouring mechanisms, you are better off limiting each bottle to serving a maximum of 20 people. (This also lets some have an extra bit later of their favs.)
750 ml = 25.3605 oz