First, you cannot fix the damage already done but you can repair and stop the rust from doing more damage. Take a fine sandpaper or a wire wheel or steel wool and remove all the rust from the gun. After the rust is removed, reblue the gun with a solution made just for this. Ask any gunshop for the solution you need. If the damage is to the point to make the gun unsafe to use as in holes in the barrel or in the firing mechanisms, you may need to replace the effected parts.
Water and aluminum foil can remove surface rust on the chrome of a gun. Steel wool can also be used to remove rust. It is advised to never use a oil to remove rust or to clean a gun.
Blue is a type of rust finish
Oxidation of the steel of a gun barrel.
To effectively fix bathtub rust, start by removing the rust using a rust remover or a mixture of vinegar and baking soda. Once the rust is removed, sand the area lightly and apply a rust-inhibiting primer. Finally, repaint the area with a waterproof paint or enamel to prevent future rusting.
Interior or exterior?
the best way to stop surface rust is to sand the spot of rust off and then spray it with some primer to keep the rust from coming back
Yes, gun blue is a chemical solution that can help prevent rust on firearms by creating a protective layer on the metal surface.
50-200 or more depending on size, amount and location of rust.
It will rust eventually.
clean, no pits or rust.
buy another pail
To ensure smooth operation and prevent rust.