MVI C,01h
MVI E,01h
MVI A,09h
LABEL:
SBB C
JZ LABEL1
INR C
INR C
INR E
JMP LABEL
LABEL1:MOV A,E
HLT
jus change the value of A in the 3rd line according to whtever number u wish to square rrot..haffun!
it is the standard usded by the INTEL to categorize their microprocessors.
There is no exit instruction in the 8085. Do you mean return, as in from a function or interrupt? If so, the instruction is RET.
Ten microprocessors are the 4004, 4040, 8008, 8080, 8085, 8086, 8088, 80286, 80386, and 80486.There are many more, and this list only included some of the Intel microprocessors, in mostly historical order.
E.g. 8085, 8086, 8255, 8051, 6800, 8257, 8251 and many more...
The most significant difference between the Intel 8085 and 8086 microprocessors is that the 8085 is an 8-bit system and the 8086 is a 16-bit system. This difference allows the 8086 system to have a much larger set of operational instructions and can make calculations to more significant places. Note: the 8085 processor does have two 16-bit registers. The pointer and the program counter.
VHDL is a hardware description language. It describes the functionality of a hardware as a program. If we know the architecture of 8085, the same can be implemented or coded using VHDL.
sample program in sum of the series using the formula for s=n/2[2a+{n-1}d] in 8085
A program which is used to count the number of numbers in an array using a 8085 microprocessor is known as a assembly language program.
It starts with the 4004 chipset (4 bit) and 8008 microprocessor (8 bit). The successor of the 4004 was the 4040, but this architecture was a dead end. The successors of the 8008 were the 8080, 8085, 8086, 8088, 80186, 80286, 80386, 80486, Pentium, etc. including the current multicore microprocessors. IBM chose to base their PC on the 8086 and 8088, then as successive newer microprocessors were developed new versions of the IBM PC used those microprocessors. Intel also produced many specialized microprocessors and microcontrollers including some RISC microprocessors (e.g. i860, i960). Current Apple Macintosh computers also use the latest Intel multicore microprocessors.
52
4 T-states as usual and 2 more are required to perform n*8 its result gives the vector address of interrupt service routine(rstn is an software interrupt)
8085 is a microprocessor designed by Intel