answersLogoWhite

0

OR AX

Will clear carry and overflow, leaving AX alone.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you clear a stack overflow?

How do you clear a stack overflow


What are the flags affected after add instruction execution?

After the execution of an ADD instruction, the following flags in the processor's status register may be affected: the Zero Flag (ZF), which is set if the result is zero; the Sign Flag (SF), which indicates if the result is negative; the Carry Flag (CF), which is set if there is an overflow from the most significant bit; and the Overflow Flag (OF), which is set if the addition results in an overflow for signed integers. Additionally, the Parity Flag (PF) may also be updated based on the parity of the result.


When does the overflow flag in 8086 set?

In the 8086/8088, the overflow flag is set when the result of an arithmetic instruction exceeds the bounds of the signed representation of a number. This is not the same as the carry flag, which is used for the unsigned representation. Both flags get set as needed. You decide which one to pay attention to.


What is overflow bit in register?

In Computerprocessors, the overflow flag (sometimes called Vflag) is usually a single Bitin a system Status_registerused to indicate when an Arithmetic_overflowhas occurred in an operation.


Difference between carry flag and overflow flag in 8086?

The carry flag indicates that an arithmetic operation between two numbers resulted in an unsigned carry or borrow. The overflow flag indicates that an arithmetic operation between two numbers resulted in an unexpected change in sign, i.e. an overflow. Carry is also like overflow. The difference is in interpretation. Do you consider the numbers signed or unsigned? Its all in interpretation because the hardware logic needed to add two numbers works the same, no matter if they are considered signed or unsigned. Both flags are set or cleared together, so you can use whichever you wish.


Which flags are affected after ADD instruction?

After an ADD instruction, the flags affected typically include the Zero Flag (ZF), which is set if the result is zero; the Sign Flag (SF), which indicates the sign of the result; the Carry Flag (CF), which is set if there is a carry out of the most significant bit; and the Overflow Flag (OF), which is set if there is an overflow in signed arithmetic. Additionally, the Parity Flag (PF) may also be affected, depending on the result's parity.


What is meant by flag is set or not set in 8085 processor?

The flags are testable conditions that are set after many arithmetic or logical instructions to indicate something about the result of the result. For instance, the Z flag means the result is zero, the N flag means it is negative, the O flag means a signed overflow occurred, the C flag means an unsigned overflow occurred, and the P flag means an even number of bits is set in the result. You can use the various flag testable jump instructions, such as JZ or JNZ to test the flag after performing an operation that sets or resets the flag.


When two numbers multiply what happens to the O and C flag bits?

When two numbers multiply, the Overflow (O) and Carry (C) flag bits are affected based on the result of the multiplication. The Overflow flag is set if the result exceeds the maximum representable value for the given data type, indicating a signed overflow. The Carry flag is typically set if there is a carry out from the most significant bit, which occurs in unsigned multiplication when the result exceeds the capacity of the destination register. Thus, both flags indicate potential issues with the result's representation.


The different types of FLAGS register?

There are a huge number of different FLAG registers. The most common are zero flag (Z), carry flag (C), sign flag/ negative flag (S/N), and overflow flag (V/O/W). Each flag contains different information about the state of the processor.


What are the condition code flags?

Condition code flags are specific bits in a computer's status register that indicate the outcome of operations performed by the CPU, particularly in relation to arithmetic and logical operations. Common flags include the Zero flag (indicating if a result is zero), the Sign flag (indicating the sign of a result), the Carry flag (indicating an overflow in unsigned arithmetic), and the Overflow flag (indicating an overflow in signed arithmetic). These flags are used for decision-making in control flow, such as branching and looping in programs. They help the processor determine how to proceed based on the results of previous instructions.


How do you stop stack overflow line 160?

restart your computer, it will clear the overcommitted stack


What are the best ways to prevent water damage caused by a bathtub overflow, including the installation and maintenance of a bathtub overflow cover?

To prevent water damage from a bathtub overflow, ensure the overflow drain is clear and functioning properly. Install a bathtub overflow cover to help contain water in case of overflow. Regularly check and maintain the cover to ensure it is in good condition and functioning effectively.