answersLogoWhite

0

(DCE) Data Communications Equipment (the serial interface responsible for clocking)

(DTE) Data Terminal Equipment (the serial interface designed for connection to a CSU/DSU to outside digital communication service)

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Router port that connects a wan link?

Data Terminal Eqipment (DTE)


What type of serial cable of DTE or DCE is connected to a synchoronous serial port on a router?

Any of them might be connected to a router, but if it connects to a piece of equipment provided by an ISP, usually the ISP's equipment will have the DCE connection, and the router will have the DTE connection. The DCE connection is the "master" part - the part that controls the transmission speed.Any of them might be connected to a router, but if it connects to a piece of equipment provided by an ISP, usually the ISP's equipment will have the DCE connection, and the router will have the DTE connection. The DCE connection is the "master" part - the part that controls the transmission speed.Any of them might be connected to a router, but if it connects to a piece of equipment provided by an ISP, usually the ISP's equipment will have the DCE connection, and the router will have the DTE connection. The DCE connection is the "master" part - the part that controls the transmission speed.Any of them might be connected to a router, but if it connects to a piece of equipment provided by an ISP, usually the ISP's equipment will have the DCE connection, and the router will have the DTE connection. The DCE connection is the "master" part - the part that controls the transmission speed.


Which items in the exhibit are DTE devices?

Router


What are serial interfaces on a router typically used to connect?

a serial interface on a router is basically used for WAN communications. we generally connect to other routers through internet using serial interface. In a lab scenario we generally emulate WAN connections by connecting the serial interfaces of the routers using a cable called DCE/DTE cable.


What are the three best ways to see if your routers serial port is dce or dte end?

1. The command show controllers serial [interface number]can be used to determine whether your serial interface is a DCE or DTE interface. An abbreviated listing of the displayed results for the show controllers serial 0 command is shown. The Serial0/0 interface is a V.35 DCE cable. This command should be used when you have an RJ-45 connection.2. The V.35 cables are typically labeled to indicate whether they are a DTE or DCE cable.3. Inspect the end of the V.35 cable to determine whether it is made (DTE) or female (DCE)


What DTE devices are used on WAN and what DCE devices are used on WAN?

DTE devices in the sense we have PC (Computers), router,Serial Printers, PLC's, Video Cameras, Video Recorders, Video Editors like this we use any of them depending on our requirementDCE devices in the sense hub,bridge,switch,modem etc are dce devices we usei hope it is useful to you........


What two devices are responsible for converting the data from the WAN service provider into a form acceptable by the router?

a modem a DTE device


How do you know which COM Port Number is assigned for a cable?

Dce cables and dte cables through you can connect.


What command is used to verify if a serial nterface is operating as a DTE DCE?

To verify if a serial interface is operating as a Data Terminal Equipment (DTE) or Data Communication Equipment (DCE), you can use the command show controllers in Cisco IOS. This command displays detailed information about the serial interface, including whether it is configured as a DTE or DCE. The output will typically indicate the role of the device, and a DCE interface will often show the clock rate configuration.


What command will show you whether a DTE or a DCE cable is plugged into serial 0?

sh controllers s 0


What is the market cap for DTE Energy Company DTE?

As of July 2014, the market cap for DTE Energy Company (DTE) is $13,676,319,822.24.


If a PVC is show with the status deleted on a previously functioning Frame Relay link what does that mean?

The DTE router is no longer receiving LMI messages from the CO switch