0
What else can I help you with?
Which two interfaces will allow access via the VTY lines to configure the router?
USb or AUX
How do you configure 2 laptops and a desktop with a wireless router?
You don't have wireless network cards you have to buy it or you have to get a lan cable(s). After that connect your router to the modem if you have it. And connect all your computers to the router. Usually default settings allow you to work with internet and inside network without any correction of default settings. After that restart your modem (if you have it) and restart your router. Then Start->Run->cmd, press enter. ping (one of your computer's Ips), for instance, ping 192.168.1.3 If it doesn't work out you have to configure DHCP server for your router, but it's already another question.
Is it possible to configure your router from your laptop if so how?
Yes, it's possible unless your router was configured to not allow to change settings for wireless connections (some routers have such option because of security considerations). Anyway you need to find out IP address for your router and start you favorite internet browser. You should put the IP address in the address bar and press Enter. It will bring you to the access page of your router. In order for you to access router's settings you need to know username and password for current administrator.
How do you connect your router to an existing network if I have say an open network and I want my own private off shoot How do I make a WIFI network using an existing network wirelessly?
You have couple of choices. First is to connect your router to existing network using a cable. And then configure secured wireless network using your router settings. Second is to connect using Bridge configuration. You might run in problems with Bridge due to compatibility issues. You even will have change firmware to DD-WRT (if your router is compatible). Once you set Bridge then you go to router settings and configure secured wireless. And here you might run in problems too because you are basically extending non-secured network in a secured. A lot of routers will not allow you to do that.
How do you unblock firewall in frostwire?
To unblock the firewall in FrostWire, you typically need to configure your firewall settings to allow FrostWire to communicate. This can be done by adding FrostWire as an exception in your firewall program or adjusting the port settings to ensure it can send and receive data. Additionally, ensure that your router's firewall is configured to allow FrostWire traffic. After making these changes, restart FrostWire to see if the connection issues are resolved.
How do you find the router password key to hook a new computer into an existing router?
Check security setting for wireless network in your router settings. Some routers allow to see the key, some mask it with asterisks. If your router masks the key (in router settings), you have to put a new key, if you want to connect more computers.
How do you connect a router to cisco 1800?
To connect to a cisco 1800 series router, you need either a network connection that goes to the router, and then you would configure the router to allow telnet or you would need a console cable, also called a rollover or cisco cable and physical access to the device.
How could not changing your router's password compromise all of your other security changes?
it would allow someone into your network and from there they may be able to change your router settings
What baud rate needs to be configured on terminal emulation software to allow a connection to the console port of a router?
The default speed is 9600.
Suppose you want to receive email notifications?
You will need to configure outgoing email settings in central admin to allow receiving email notifications.
When using client and server applications on the internet will security settings on the router automatically allow communication?
no they have to be allowed to access the network.
How can I create a Minecraft server and how does minecraft server work?
To create a Minecraft server, you can follow these basic steps: 1-Choose a server software: There are various server software options available for Minecraft, such as Spigot, PaperMC, and Bukkit. 2-Install the server software: Once you have chosen a server software, you will need to download and install it on your computer or server. 3-Configure server settings: After installing the server software, you will need to configure server settings such as game rules, plugins, and server properties. 4-Port forward your router: If you are hos-ting the server on your computer, you will need to port forward your router to allow players to connect to your server.
