answersLogoWhite

0

The Intel 8087 math coprocessor typically operates at clock frequencies of 5 MHz, 6 MHz, and 10 MHz, depending on the specific model and the system it's integrated with. It was designed to work in conjunction with the Intel 8086 and 8088 microprocessors, enhancing their mathematical computation capabilities. The 8087 facilitates floating-point arithmetic and other complex calculations, significantly improving performance for applications that require such processing.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Give the clock out frequency and state time T of 8085 when the crystal frequencies is 5MHz?

The clock out frequency of an 8085 is one half the crystal frequency. The period of one T cycle is the inverse of the clock frequency. At a crystal frequency of 5MHz, the clock is 2.5MHz, and T is 400 ns.


Micro processor with a clock frequency of 100MHz will have a clock period of?

The clock period of a microprocessor is the inverse of its clock frequency. For a clock frequency of 100 MHz, the clock period can be calculated as follows: Clock Period = 1 / Frequency = 1 / 100,000,000 seconds = 10 nanoseconds. Therefore, the clock period is 10 nanoseconds.


How do you calculate minimum clock period in a digital circuit?

If you have the Maximum clock frequency, then you can figure out the minimum clock period using this formula: 1/(minimum clock period) = (Maximum clock frequency).


Use of low frequency clock generator?

How to make Low frequency clock generator using ANAD gates?


What is the clock period of a clock frequency of 1ghz?

The clock period is the time duration of one clock cycle. For a clock frequency of 1 GHz (1 billion hertz), the clock period would be 1 nanosecond (1/1,000,000,000 seconds).


How do you calculate Clock period?

The clock period is calculated as the inverse of the clock frequency. It can be determined using the formula: [ \text{Clock Period} (T) = \frac{1}{\text{Clock Frequency} (f)} ] For example, if the clock frequency is 2 GHz, the clock period would be ( T = \frac{1}{2 \times 10^9} = 0.5 ) nanoseconds.


What is the Maximum clock frequency of 8086 microprocessor?

that depends on the microcontroller. check the datasheet.


Why used a clock signal timing diagram?

We use clock signal in timing diagram because the microprocessor operates with reference to clock signals provided to it. At pins X1 and X2 we provide clock signals and this frequency is divided by two. This frequency is called as the operating frequency.


What is the clock frequency of 555 ic timer?

The 555 IC timer does not have a clock.


What is the period of a clock waveform whose frequency is 500 kHz?

The period of a waveform is the reciprocal of its frequency. For a clock waveform with a frequency of 500 kHz, the period can be calculated as 1 / 500 kHz = 2 microseconds.


What is 7220 plus 867?

8087


Why implement 8086 processor to 8087 processor?

The 8086/8088 is the general purpose processor. The 8087 is the math co-processor for the 8086/8088.