0
What else can I help you with?
Which command shows the administrative distance of routes?
what command allows you to configure an administrative distance
How can you know how many computers are path your network?
The route via Path B is installed because the EIGRP route has the best metric to network 10.2.0.0/16. The route via Path A is installed because the static route has the best metric to network 10.2.0.0/16. The route via Path B is installed because the EIGRP route has the lowest administrative distance to network 10.2.0.0/16. The route via Path A is installed because the static route has the lowest administrative distance to network 10.2.0.0/16.
What the administrative distance and metric for static route?
The administrative distance for a static route is typically 1, meaning it is very reliable and preferred over routes learned from dynamic routing protocols. The metric for a static route is typically one hop, meaning it has a fixed cost regardless of network conditions or traffic load.
What is administrative distance?
nop
Which additional piece of information is included in the updates of classless routing protocols to support the use of VLSM and discontiguous networks?
metric, network mask, neighbor router ID, administrative distance
What is the default administrative distance for RIP?
120
Which two statements correctly describe the concepts of administrative distance and metric?
Administrative distance is a way to prioritize routing information from different routing protocols; a lower administrative distance is preferred. The metric, on the other hand, is a value that represents the cost of a particular route, aiding in selecting the best path to a destination.
What is the administrative distance of a default route?
The administrative distance of a default route is typically 1. This means that it is considered the most reliable and preferred route for forwarding traffic when no other more specific route is available in the routing table.
Which statement correctly describes how R1 will determine the best path to R2?
R1 will install an EIGRP route using network B in its routing table because the administrative distance of EIGRP is lower than RIP.
Wich two statements correctly describe the concepts of administrative distance and metric?
Administrative distance refers to the trustworthiness of a particular route. Routes with the smallest metric to a destination indicate the best path.
Why would a floating static route be configured with an administrative distance that is higher than the administrative distance of a dynamic routing protocol that is running on the same router?
A floating static route is configured with a higher administrative distance than a dynamic routing protocol to ensure that it only takes effect if the dynamic route becomes unavailable. This allows the router to primarily use the dynamic routing protocol for its normal routing decisions, benefiting from its ability to adapt to network changes. If the dynamic route fails, the floating static route will then be used as a backup, providing a failover mechanism without disrupting the primary routing process.
Which command will show the administrative distance of routes?
The "show ip route" command in Cisco devices will display the administrative distance of routes along with other routing information.
