Intr timer interrupt 0 and 1 external interrupt 0 and 1
IRQ 0
device
There are six classes of interrupt: *Supervisor Call Interrupts (SVC) *I/O Interrupts *External Interrupts *Restart Interupts *Program Check Interrupt *Machine Check Interrupts
Jiffies is a global variable that holds the number of ticks that have occured after the system has booted. On each timer interrupt the value of this variable is increased by 1.
Just about any detectable event can be an interrupt for a computer. An event can be something like a keypress on the keyboard, a data stream on a serial input line, when the disk controller detects that the requested data has been read from the disk, when a timer event occurs (some software applications set a timer then "wake up" when the timer expires, that's done with interrupts). Most hardware is associated with some kind of interrupt vector.
Interrupt is a verb.
An interrupt vector is the memory address of an interrupt handler, or an index into an array called an interrupt vector table or dispatch table. Interrupt vector tables contain the memory addresses of interrupt handlers. When an interrupt is generated, the processor saves its execution state via a context switch, and begins execution of the interrupt handler at the interrupt vector.
"You should not interrupt class," the teacher scolded the boy.
Download NGASM Assembler from www.BestDiskRecovery.com/ngasm/index.html The included Programmer's Manual comes with TSR examples. But you will have to do your stuff on the 10 seconds, etc...
the prefix of interrupt is in
The prefix for interrupt is "inter-".