0
What else can I help you with?
What type of network cable is used between an Ethernet port and a console port?
Console cable. DB4
Which items are needed to establish a terminal session between a PC and the router for the initial configuration?
Proper console cable Terminal emulation software
What is rollover connection?
Rollover cable (also known as Cisco console cableor a Yost cable) is a type of null-modem cable that is often used to connect a computer terminal to a router's console port
Cable A is plugged into the console port on switch S1 What is required on the PC for a network technician to enter the initial configuration on S1?
Refer to the exhibit. Cable A is plugged into the console port on switch S1. What is required on the PC for a network technician to enter the initial configuration on S1?
What is a cable terminal?
A cable terminal is a hardware device that connects the end of a cable to a connecting point, such as a terminal block or another cable. It allows for the secure and reliable transfer of signals or power between cables or devices. Terminations can vary depending on the type of cable and the purpose of the connection.
Do you need the Ethernet cable if you have gold membership for xbox?
The ethernet cable is used to connect your console to the internet (wired). You need this to actually get a network connect on the Xbox 360.
What is the difference between connecting to a router through the console port or through the telnet program?
If you connect to the router via the console port then you are physically making a connection with a physical cable to the router. This implies you have to be close to the router itself. Using telnet allows you to connect to the router from anywhere in the network, and doesn't require a physical cable connection.
What is the purpose of a cable gateway?
A Cable/DSL gateway is a network gateway. It is used to establish a connection between DSL and Cable TV to a computer network by physical means, such as through LAN or a wireless network.
Difference between telecom network and computer network?
A Telecom network is a Telephone and Cable TV Network. A computer network involves computers.
What is the purpose of the red cable in the network setup?
The purpose of the red cable in a network setup is to connect devices and facilitate the transfer of data between them.
How do you replace battery terminal on a 1999 Mercury Sable?
A battery terminal or a battery CABLE terminal. If the terminal is gone or destroyed on the battery, you need a new battery. If the cable terminal is terminal, you can buy an after market replacement or a complete new cable with terminal at most any auto parts store.
What controls the flow of data between the computer and network cable?
The Network Interface Card (NIC) or modem (Dial-up) controls the flow of data between your computer and the cable.
