Router(config)# line vty 0 4
Cisco business grade routers and switches use what is called IOS its a command based os meaning you have to enter commands to configure. There are console ports you can connect to a computer to a router where you can have direct access with the router via putty or hyper terminal (there might be more programs). once you set up like this you have access to the ios command line interface.
To set up a Linksys BEFSR41 router, first connect it to your modem using an Ethernet cable plugged into the WAN port. Then, connect your computer to one of the LAN ports on the router. Access the router's configuration page by entering its default IP address (usually 192.168.1.1) in a web browser and logging in with the default credentials (often "admin" for both username and password). From there, you can configure your internet settings, set up Wi-Fi, and customize other features as needed.
yes router forward traffic to all ports.
A router will typically support between 4 and 8 ports. For additional ports, a standard Ethernet switch can be connected to one of the ports.
the router as ports commonly used for lan cannection is (Ethernet)
A switch cannot function as a router. But you can plug a switch in to one of the ports on the router if you need additional ports.
The number of ports vary with the router - some as few as 4, and some many more than that.
Connect the broadband connection to a router, and connect the router ports to the individual systems. If necessary, extend the number of ports on the router by attaching a switch to one of the router ports and attaching multiple clients to the switch.
You have to setup a router and open the ports in the router for this purpose. But Pacenet have blocked many ports so you can go to their local office and ask them to open the ports.
65536 virtual ports. Port number is a 16 bit number, so there are 2^16 (65536) ports for a NAT router.
Configure Port Forwarding or open the below ports in your Router/Firewall. Here's the Port #'s and service:TCP 80UDP 88UDP 3074TCP 3074UDP 53TCP 53
It will manage ports on your router and firewall.