0
What else can I help you with?
Why do you need to log on to a computer network?
So the network can correctly identify you, personalize settings for you, and allow you connection to the network (or internet).
Which three labels correctly identify the network types for the network segments that are shown?
Network B -- WAN Network C -- LAN Network A -- LAN
Role of intermediary devices in the network?
determine the pathways for data
What an administrator should take the time to troubleshoot all network problems correctly by asking specific question designed to identify the problem?
scope
What tracert utility does?
The tracert (or traceroute) utility is a network diagnostic tool used to track the path that packets take from a source to a destination across an IP network. It works by sending packets with progressively increasing Time to Live (TTL) values, which allows it to identify each hop along the route and report the response time from each intermediary device. This helps users analyze network performance, identify bottlenecks, and troubleshoot connectivity issues.
What is a function performed by an intermediary permits only known trusted data to access the network?
firewall
When configured correctly can network firewalls can help protect your network?
Yes, they can.
What protocol does PPP use to identify the Network layer protocol?
Network Control Protocol is uses to identify the Network layer protocol used in the packet
What is the role of subnetmask?
The subnet mask helps determine which part of an IP address represents the network and which part represents the host. It is used by devices to identify whether an IP address is within the same network or needs to be routed to a different network. By using the subnet mask, devices can correctly send data to the intended destination within a network.
What is mt103 field 56?
In an MT103 message, which is a type of SWIFT message used for international wire transfers, Field 56 is designated for the "Intermediary Institution." This field specifies the financial institution that acts as an intermediary in the transaction, facilitating the transfer between the sender's bank and the recipient's bank. It typically includes the bank's BIC (Bank Identifier Code) or other identifying details, ensuring that the funds are routed correctly through the banking network.
Which two statements describe classful IP addresses?
The number of bits used to identify the hosts is fixed by the class of the network. Up to 24 bits can make up the host portion of a Class C address.
What is the difference between intermediary devices and end devices?
well if you are talking about networking devices this would be the answer to your question. ^end devices usually refer to a piece of equipment that is either the source or the destination of a message on a network. -computers, including workstations, laptops, and servers connected to a network -network printers, Voice Over IP (voip) phones -camera on a network, including web cams and security cameras ^intermediary devices connect the individual hosts such as -switches -modems -routers -and even firewalls can be considered an intermediary device because they analyze traffic exiting and entering a network Note: A hub is NOT considered an intermediary device because it does not make forwarding decisions.
