we would need to redistribute ospf routes into eigrp and vice versa. redistribution will have to be done on an ASBR(autonomus system boundry router) eg: we have an ospf process wid process id 10 running and eigrp with ASN 20 running in our network redistribution on ASBR would be conf t router ospf 10 redistribute eigrp 20 subnets metric 1 and in eigrp conf t router eigrp 20 redistribute ospf metric 1 1 1 1 1 we see i used 5 ones in eigrp process to redistribute opsf into eigrp. thes 1's are metrics for eigrp namely load bandwidth delay reliability
170
Compared to RIP, EIGRP has a lower administrative distance. Compared to EIGRP, RIP has a higher metric value for the route. Compared to RIP, the EIGRP route has fewer hops. Compared to RIP, EIGRP has a faster update timer.
autosummarization
autosummarization
show ip eigrp neighborsw
Which default EIGRP configuration must be modified to allow an EIGRP router to advertise subnets that are configured with VLSM
Enhanced Interior Gateway Routing Protocol (EIGRP) was once as Cisco Propitiatory routing protocol for Cisco routers. However many routers that are not Cisco now support the use of EIGRP.
router#config t router(config)#router eigrp 100 #net NETWORK ADDRESS
224.0.0.10
bobo The packet is sent to discover neighbors within the EIGRP network. The packet is sent to search for network devices within an EIGRP network. The packet is used to propagate routing information within the EIGRP network. The packet is used to send an unreachable reply to another router within the EIGRP network.
Both have their advantages. However, if I were forced to choose between phone or computer networking I would choose the computer networking. As long as I have an Internet connection, I know how to make and receive texts and calls, communicate with people, plus collaborate on projects all online. I prefer a PC because it has a bigger work screen than a tinier device.