answersLogoWhite

0

What else can I help you with?

Related Questions

Why does my television sometimes show just a line across the middle and no picture?

If this is an older analog (CRT tube) type television and since it `occasionally happens' it sounds like you have a bad (intermittant) solder connection somewhere in your vertical deflection circuit.


What could be used to output a picture when a hardcopy is not needed?

CRT


What are the two differences between CRT monitor and a LCD monitor?

CRT monitors use a beam of electrons to form the picture - LCD's use microscopic pixels. CRT's need large amounts of electricity to form the picture - LCD's work with low voltages.


What it means when flat screen tv developes a thin vertical blue line?

Your LCD panel is likely failing, according to several sites. If it is on an edge, though, it could be software/cable related (external connection with the Sky+HD Box). If this is a CRT (tube) TV and nothing but the line is present, then it could be the horizontal deflection system is broken. If there is still a picture, you may be seeing the support wires (there will be 2 or 3 or them) that hold up the aperature grid on Trinitron-style CRT televisions. This is normal.


Why lw-crt tv box dot display on flat monitors?

Why lw-crt tv box don't display on flat monitors? They actually try to display but the picture will flicker and disappear.CRT is "Cathode Ray Tube" and LCD is "Liquid Display Cristal" thus the units were manufactured to specifically produce for CRT monitors not LCD monitors.LCD monitors have a different resolution and image refresh rate compared to CRT monitors therefore both monitors (LCD & CRT) monitors, compose the picture in different formats.So the LW-CRT-TV box produce a picture for low resolution monitors that is to say CRT.


How are television tubes discharged safely?

Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT after removing the anode.


The number of active picture elements in a television image depends upon?

CRT screen size


What is CRT in TV terms?

The CRT refers to cathode ray tube. This is the oldest of the varous TV types. More recent developments have been projection, plasma, etc.


Inside parts of a CRT monitors and its picture?

Frankly, if you know there are six parts, then by definition, you know the answer. Stop trolling,.


Does leaving a TV on in power save mode damage the picture tube?

It shouldn't. If there is no actual power to the CRT (no picture visible) then there really can't be any degradation of the tube.


If I play a DVD on my HDTV I get a thin black horizontal line in the picture a few pixels from the top. Connecting my computer you see the line on the top bottom and sides of any video or DVD. Why?

On your TV, you have the ability to change the aspect ratio of the picture. What's happening is that you may have the aspect ratio improperly set so that the DVD's picture doesn't fill the screen, or possibly the video was filmed in an aspect ratio that's different that our current standards (maybe something originally ilmed in a different video format). On your computer, it sounds like you're seeing the edges of the viewing area of your monitor. ALL CRT (tube type monitors) have a usable viewing area, but also conatin a black line around the top, bottom and sides.


Uv cathode ray tube?

A Cathode Ray Tube (CRT) is found in a Computer Monitor and is the most expensive part. Within the CRT are three electron guns, Red, Green and Blue. Each of these guns streams a steady flow of electrons left to right for each line of your monitor. As the electrons hit the phosphors on the CRT, the phosphor will glow certain intensities. As a new line begins the guns will then begin at the left and continue right, these guns will repeat this process sometimes thousands of time until the screen has been completely drawn line by line. Once the phosphors on the CRT have been hit with an electron they will only glow for a short period of time, because of this the CRT must be refreshed which means the process will be repeated.