CPVC is better suited for hot water
There should be no more than six inches between CPVC pipe and the exhaust flue on a water heater. If the CPVC pipe is installed too close it can be a safety issue.
Mainly for making water pipe.
I would use hot water conn. on it. Both on cold and hot
There is no special PVC pipe. CPVC can be used for hot water applications or in my opinion just use PEX pipe.
I’m considering installing CPVC pipes from Sudhakar Group for my house. CPVC pipes are safe for drinking water when NSF-certified, as they’re made from non-toxic materials and resist chemical leaching, ensuring clean, potable water for my home.
no, use CPVC instead.
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
CPVC glue is specifcially formulated to glue CPVC pipe and needs a primer.
The type of service they are to be used for In a home PVC is used for the drains,the drain vents,main out going sewer line,water supply lines for a boiler/heating system or sprinkler systems. In a home CPCV is used to supply water to sinks,toilets, showers,hot water heater and exterior faucets... Because of the difference in usage there is also a difference in the wall thickness between the PVC pipe and CPVC pipe... So a 3/4 in PVC fitting will not match up to a 3/4 in CPVC pipe and vise versa...
CPVC pipe is approved for hot and cold water. PVC pipe is approved for cold water only. This is only applicable in certain areas. You should check your local area codes to see if this applies to you.
Only if it is wraped pipe -- And prime and wrap fittings also and install a annode making sure your annode is lower than your pipe
Depends on what pipe you are asking about. Most pipe such as PVC has a max heat rating for internal and external temperatures. this is why regular white PVC should never be used for hot water from a hot water heater which can be 120 degrees (F) or more and melt regular PVC. That is why they recommend using CPVC which has a higher temperature rating. Depends on what pipe you are asking about. Most pipe such as PVC has a max heat rating for internal and external temperatures. this is why regular white PVC should never be used for hot water from a hot water heater which can be 120 degrees (F) or more and melt regular PVC. That is why they recommend using CPVC which has a higher temperature rating.