Yes, you can. You can do this with Straight Talk's "Bring Your Own Phone" program...which essentially requires you to purchase a SIM card. (they are usually about 15 bucks)
Not all phones are accepted, however. Generally speaking, the phone must be a GSM phone. Check out Straighttalksim.com, click "shop" and then "buy now" for more information.
not a switch but it does have one if you over boost at about 12-14 psi.
i have a boost mobil cell phone i moved to kansas and the are no close towers over here... can i switch it to a verizon phone?
Yes, but only if you go into your local metro store an have them switch it but it cost bout 20 or 25 dollars.
No, usually that would be a straight-thru cable because the signal is crossed over by the switch itself.
when you are connecting same devices like computer to computer or switch to switch or router to router to use cross over cable. when you are connecting different devices like computer to switch or computer to router to use straight cable.
You need to use a straight type of connection. 568A or 568B depending which type your network is using.
For this you need to carry out two steps: Firstly, call straight talk and check if your existing phone is compatible with it. Then you need to obtain an unlock code from the US Cellular/sprint to switch to straight talk from Verizon. Then when u get the unlock code, ask them to guide you through the procedure of switching.
Boost the dialogue vloume over the SFX and Music
Most switches and routers these days allow for a standard straight through cable to connect each other. (So any CAT 5e or 6 cable you find at Best Buy will be fine) Older devices (Such as a Cisco 2900xl switch) require a cross over cable to connect like devices such as a switch to switch. These cables can also be found at Best Buy and will be clearly labeled "Cross Over". There are two different standards of straight through cables if making your own. See the related link. To make a cross over cable, wire one end with the A standard and the other with the B standard.
over 9000
i got two boost phones.how do i change over to my other boost mobile phone,keep the same no.
When connecting two computers, use cross-over. Cross-over is required to connect the transmit and receive terminals of the two endpoints. When connecting through a router, switch or hub, use straight-through. The router, switch or hub provides the crossover.