0
What else can I help you with?
What type of cable should you use to connect PC after connect switch to switch?
To connect a PC to a switch you should use a straight through UTP cable.
What would you use a crossover cable for?
To connect two devices of the same type together. e.g. You would use a crossover cable to connect a router to another router, a switch to another switch or a computer to another computer. If you are connecting diferent devices together, such as a router to a switch, a straight through cable should be used.
What type of cable is required to connect a host to a Cisco switch to initialize the configuration?
straight-through cable
What type of cable do I use to connect directly to another computer over a switch?
You need a crossover cable for that.
What type of RJ45 UTP cable do you use to connect a PC's COM port to a router or switch console?
crossover cable
Differentiante between cross cabling and straight cabling?
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
What is the correct cable type used to connect each switch to the various PCs?
cat5,cat5e $ cat6
What type of cable used to connect the Ethernet interface on a switch to the Ethernet interface on a router?
To the switch the router is just another host, so it connects with a straight Cat 5 or Cat 6 cable.
What type of cable do you use to connect computer to switch?
Typically you would use a CAT-5e or CAT-6 UTP (Unshielded Twisted Pair) network cable.
What cable will use for connecting switch to switch?
Most switches and routers these days allow for a standard straight through cable to connect each other. (So any CAT 5e or 6 cable you find at Best Buy will be fine) Older devices (Such as a Cisco 2900xl switch) require a cross over cable to connect like devices such as a switch to switch. These cables can also be found at Best Buy and will be clearly labeled "Cross Over". There are two different standards of straight through cables if making your own. See the related link. To make a cross over cable, wire one end with the A standard and the other with the B standard.
How can you connect between two switch without router?
connect it with a crossover cable connect both end to same type port either two gigabit port or two fast ehternet port
How can I create a switch loop in an electrical circuit?
To create a switch loop in an electrical circuit, you need to run a cable from the power source to the switch, and then another cable from the switch to the light fixture. Connect the wires according to the wiring diagram for the specific type of switch you are using. This setup allows you to control the light fixture from the switch.
