A cable modem is a rather broad term and may vary in technical specification depending on supplier. In general cables modems connect to a dedicated cable and offer internet services, possibly along side a cable TV service.
ADSL is a specific technology used to deliver high speed data services on an existing telephone line. The internet service is sent at specific frequencies and are filtered by the ADSL modem.
If you are looking to buy a modem you need to find out what type you need. The best way to do this is to call your ISP.
If you have two adsl lines then yes you can use two modems. Two modems on one line won't work. Just get a router to expand your network or up your broadband speed if available.
I don't know whether you can use them as ADSL/ADSL2+ modems, but I'm sure it's worth a try. What you're very unlikely to be able to do is use the two wire capability - Bigpond has had the VOIP capability deleted from the firmware. This was on a news site I read 2 minutes ago.
5 common technique are ADSL ADSL2+ CABLE WIRELESS ISDN Another 5 techniques 1. WIRELESS ROUTER 2. SWITCH OR HUB 3. NETWORK CARD/NETWORK ADAPTER 4. MULTILINKING MODEMS 5. SATELLITE BROADBAND Full meaning DSL: Digital Subscriber Line ADSL: Asymmetric Digital Subscriber Line ISDN: Integrated Service Digital Network
-5
2 miles
you put pockets on them
there is no difference
You can measure the phase difference between 2 pendulums by measuring the distance between the two. The amount it comes out to will be the difference.
The difference is... 25
Depends. You need to find out if your local carrier supports ADSL 2+ or not. 2+ DSL can go up to 30000 feet. The speed is dependent upon the quality of the line, but i have installed many 3.0 mbs DSL lines at 17k feet. You should have no problem getting 3.0 mbs service if the carrier has the ADSL 2+ technology in place.
One half is equal to 0.5, so 4 halves is equal to 2 (since 4 x 0.5 = 2). Therefore, the difference between 1 and 4 halves (2) is 1. When comparing this to 4, the difference between 2 and 4 is 2. In summary, the difference between 1 and 4 halves is 1, while the difference between 4 halves and 4 is 2.
The difference between 9/16 and 1/2 is 1/16.