0
What else can I help you with?
List the steps to recycle the connection to an ISP when using a cable modem?
Turn off modemTurn off routerTurn on modem, wait for indication that the modem is onlineTurn on router, wait for indication that router has an internet connectionMay need to go into CMD and release\renew the IP address for computers connected to the router.
How do you hook up a wireless laptop to wireless router?
Basicly for the most common type of router, you turn off your modem and conect the modem to the router. After that the router has to conect to the pc. Run the software that comes with your router and follow through with the indications. After this both modem and router are turned on. When you open a laptop you will see your device working. Sometimes you have to get the ip number of your model and make of router write it in your browser and go to that page to have settings done to it.
Your power went out while playing on xbox live and now you cant get on because your dns is failing?
Turn of your Xbox, your router, and your modem (actually, remove the plug from the wall in the case of the modem). Wait 10 minutes. Plug the modem back in and turn it on. After it's up, turn on your router. After it's up, try powering up your Xbox again and logging back on.
How do you get xbox live without turning on computer?
You don't need to turn your computer on. Just make sure your Xbox is connected to your router and the router and/or modem is on. If using wireless just plug it in and select your network I'm the Xbox settings.
Xbox 360 update to nxe failsfailure xbox live test in network settings?
i had the similar problem! a tip!do you have a Modem or such router?then take out the internet cable for about 30 seconds (and if you can turn the modem/router off do that too) then plug it in and test it!
How do DSL routers connect to a modem?
There are seven steps to connect a DSL router to a modem. Step 1: Turn off the modem. Disconnect the modem from your computer. Step 2: Plug in the ethernet cable to the back of your computer. Then plug the other end into the internet port on the Linkskys wireless router. Step 3: Plus a second ethernet cables into a numbered port on the Linkskys wireless router. Step 4: Turn on your modem, connect the power adapter to the Linkskys router and let it power on. Turn on the computer, open a browser window and type 192.168.1.1 into the address bar and hit enter. Step 5: Under the setup tab select basic setup. Select the type of DSL you are using Step 6: Type in your username and password Step 7: Open new browser and test connection.
Why When you open HLDS you see your private IP not public ip?
It's ONLY because you have a router! Turn of your router and connect the computer directly with MODEM! There is no other solution!
What do you do if your iPod touch internet is not working?
this has happened to me also. I discovered an answer that always works: turn your modem and router off, wait a minute, and then turn them back on.
Why won't my internet work when i just hooked up a linksys wireless router?
If the internet connection going to your router is connected to a modem then you mght want to turn it off. The modem will have the MAC for your PC stored in it and when you plug in the router it sees its a different MAC and it wont work. Switch the modem off, take a break and then power it on again. When you leave it off for a while it looses all its data, including the MAC address and the next time its powered on it checks for the MAC and finds your router and then it will work. Hopefully.
What can I do if CODMW2 on Xbox Live won't find a game?
turn your router/modem of then on then wait 30 seconds one you've waited go on to modern warfare and search
How do you setup a computer network?
If the computer network is to have internet, then you would need a modem connected via a phone line or cable connection. Then the modem is usually connected to a Router, that in turn connects to a "Switch". All the computers then connect to the Switch through ethernet cable (cat5 or cat6). One computer is often designated as the "Server", a central point to hold the programs and data for the other computers (clients) to use. INTERNET --> MODEM--> ROUTER --> SWITCH --> SERVER --> COMPUTERS (In some cases, the router can also serve as the switch as well).
Installing a Wireless DSL Modem?
Installing a wireless DSL modem is a simple process, and in this article you will learn the steps that need to be taken for proper installation. • If you have not purchased your wireless modem, then you must understand one thing first. When you are selecting a unit, know that modems with the longest ranges are the 802.11 N modems, and the middle of the road is 802.11G. There are also dual band modems which have both N and G frequencies, so know what you need before you purchase a modem. • Once you have purchased your modem and brought it home, plug the power cord into an outlet. You also want to plug in the cable connecting the modem box to the wireless router. By making this connection, you are ensuring that the internet is provided to the router. • You will then want to install the software that came with the modem. Installing the software will give you access to manage the modem and create different settings and roles for different computers or wireless devices. • Once you have downloaded the software, turn the power on to the wireless device in which you want to gain access to using the router. It is important to know that any device that you want to connect your modem with must have a Wi-Fi card installed or attached, or it will have to be plugged directly into the router or modem itself. • Once you have turned the device on, turn on the Wi-Fi option so the device can pick up the new router. You will want to select the new router or modem as the default set up, so you are able to access the internet wirelessly. This also allows multiple users to access the internet at the same time. Once you have followed these steps, your new wireless DSL modem should be set up to access the internet between two or more devices. You are able to use this process for setting up the wireless router to connect with gaming systems, cameras, laptops, desktop computers and even telephones. Just make sure that whatever the device is, that is has a Wi-Fi card already installed or attached, or you have a lot of extra Ethernet cable laying around.
