As close as possible is best, but there just has to be a vent so that the air that is in the line has somewhere to go so that the liquid isn't trying to compress it. The closer the vent is to the toilet, the better it will flush.
Yes as long as the drain has a trap and is vented
It's not the toilet, there's a blockage in the pipes some where after the drain pipe from the toilet joins up with the drain pipe from the tub.You're going to need to have the pipe snaked.
You can try pouring hot water down the drain to help break down the toilet paper. If that doesn't work, using a plunger or a drain snake to physically remove the blockage may be effective. For more severe clogs, you may need to call a plumber for professional assistance.
The main drain is plugged. You may need to remove the toilet and snake directly down the drain.
Common causes of a slow toilet drain include clogs from toilet paper, hair, or foreign objects, as well as mineral buildup in the pipes. To fix a slow toilet drain, you can try using a plunger or a drain snake to remove the blockage. If that doesn't work, you may need to use a chemical drain cleaner or call a plumber for professional help.
To unclog a toilet drain in the wall, you can try using a toilet auger or a plumbing snake. Insert the auger into the drain and rotate it to break up and remove the clog. If that doesn't work, you may need to call a professional plumber for assistance.
Probably not. There is no vent for that drain, it did not need one for a floor drain. A toilet is trying to push against the air pressure in the drain.Normally a decent plumber will install a floor drain with in 15 feet of a vented line or will vent the FD in case irt exceeds the 15 ft ruleA Floor drain can be as small as 2" diameter and thus it is undersized for a toilet and a floor drain alread has a trap and a toilet would thus be drouble trapped
the sink drain is prob.in the wall.you would have to get a wall mount commode,or install drain in floor and plug drain in wallAnswerYou also need a 3 or 4 inch drainpipe.Ans 3 - You can do this if you fit a new 3" drain to the main pipe and run it to a toilet flange where the sink is.
Should be individually vented
You need at least a 3 in. pipe -- shower is 2 in. pipe
The easiest solution would be to move the toilet so that it lines up with the waste pipe.
Your toilet may be gurgling due to a clog in the drain pipe or a problem with the venting system. To fix it, you can try using a plunger to clear any blockages in the toilet or drain pipe. If that doesn't work, you may need to call a plumber to inspect and repair the venting system.