More than likely you'll have to cut the supply pipe off behind the valve or loosen the large nut on the valve which would release the valve from the compression ring...then just replace the valve, if that is what you are attempting to do.
For supply, it is copper and galvanized iron. For waste, ABS (plastic) or cast iron.
Because it used to be cheap and the best material. In the last 10 years more homes are going to plastic pipe.
The different types of toilet water supply lines available for installation include flexible braided stainless steel lines, rigid copper lines, and plastic lines.
New York, as NY has the most high rise buildings thus we have the most copper and our water supply does not attack copper as other states water supply can
it should be connected to a breaker in the distribution panel.
Use washing machine hoses instead of plastic supply lines.
why does the lamp bright when it is connected to the AC supply
Plastic plumbing pipes are advantageous over traditional materials like metal or copper for residential water supply systems because they are lightweight, easy to install, resistant to corrosion, and cost-effective. Additionally, plastic pipes are durable, flexible, and do not require soldering, making them a popular choice for modern plumbing installations.
There are various companies that supply plastic chairs. One can find different types of plastic chairs by looking for event rental stores or companies.
If additional resistance is connected in parallel with a circuit the supply voltage will decrease?
You can measure the current and power of a 'power supply', using an ammeter and a wattmeter. With the power supply connected to its load, the ammeter must be connected in series with the power supply's input. The wattmeter's current coil must also be connected in series with the power supply's input, and its voltage coil must be connected in parallel with the supply, taking the instrument's polarity markings into account.
You used the WRONG plastic - should have used PEX, not glued plastic for water supply line in a home !-If it was my home I'd remove it and replace with PEX.If you don't you may have to run water through for about a month to get rid of that taste.