If additional resistance is connected in parallel with a circuit the supply voltage will decrease?
No change in supply voltage as additional resistance is connected in parallel circuit.
Resistance is connected in parallel with voltmeter or say, voltmeter is connected in parallel with resistance.
The resistors should be connected in parallel .
In simple way resistor bank contains number of resistors in series or parallel combination. They are connected in parallel to decrease the resistance and increase current rating and power dissipation.And they are connected in series to increase resistance and power dissipation.
It depends on what you want to accomplish. If you want to decrease the resistance in a circuit, you would place the box in parallel to some other resistor. If you want to increase the resistance in a circuit, you would place the box in series.
In principle, it is infinite. I have not connected a parallel circuit in ages.
resistance inparallel decrease in value proportionally two resistance can be calculated as R1XR2/SUM OF R1+R2. many values can be calculated as a fraction 1/r+1/r2+1/3 ....and take the total sum reciprocal
the voltage across that resistor will increase if it is in series with the other resistors. the current through that resistor will increase if it is in parallel with the other resistors.
21
Two resistors connected in parallel are 1/2 the sum of their resistance. The resistance of two resistors connected in series is the sum of their resistance. For example: The total resistance of a 100 ohm resistor connected to a 200 ohm resistor in parallel is 100+200 divided by 2 = 150 ohms. The total resistance of a 100 ohm resistor connected to a 200 ohm resistor in series 100+200= 300 ohms.
An ammeter is connected in series. A voltmeter is connected in parallel. ammeter should always be connected in series instead of parallel becoz it is a low resistance device and we know that resistance is inversly proportional to current so more current will pass through it and if it is connected in parallel than it may get damaged
if we remove a resistor from the parallel connection the effective resistance value will be increased.