ducktape buddy! ducktape buddy!
your problem is the rocker/engine cover is blocked the only way to fix the problem is to change the rocker/engine cover.
depending on where the oil is leaking from. sump gasket? rocker cover gasket? hoses? castings?
Rocker assembly 135ftlbs rocker box or housing is 35ftlbs
Remove a rocker cover and measure one.
Remove the valve cover. Remove the center nut or bolt that holds down the rocker arm. remove rocker arm, pull out the bent push rod. Install new push rod and put it back together.
Remove the valve cover. The rocker arm assembly can be removed by loosening the rocker arm screws. Each rocker arm will have a screw.
how to fix cracks in patent leather
you cant fix it, you need to replace it.
Subject: Sportster 1200 rear rocker coverQuestionI've replaced my front rocker cover gaskets due to an oil leak. Now I can't get the rear rocker cover off. I've removed the top bolts but the frame is blocking the removal of the cover. Is there an easy way to remove the covers?AnswerSorry I didnt answer you sooner. My hard drive decided to go south!The rocker cover will come off without removing the motor. Its a tight fit and you have to turn it to get it out, but it will come out. If you are removing the lower rocker cover you have to remove the pushrods to get it out.Good luck and happy ridingMike
carburettor prices vary with different carburettors.but you cannot fix a cracked carb.u need to replace the carburettor
You can't fix a cracked head unless you can weld. it must be replaced with a new head.
in the rocker cover