0
How do you fix one slow running faucet which worked perfectly before but not after a new water heater was installed and all other faucets work fine?
Check the screen in the end of the neck. Very often rust and sediment are dislodged when the water system is shut off. If not that then possible in the valves themselves. Depending on the age of the pipes you might have to clear them several times. You can take the valves out and VERY slowly open the shut off valves just enough to let water come out of the top of the faucet. This should flush out anything that may be loose in the line.
What else can I help you with?
How do you fix leaks in newly installed faucets?
If the leaks are at the water connections you might need to add Teflon tape before you tighten the connections. If you did add the tape, you might need to add more.
How are bathroom faucets installed?
Bathroom faucets are installed by pushing the faucet into the hole left by the old faucet. Before doing this, you'll probably want to apply plumber's tape or joint compound on the threads of the faucet stems and also apply caulk. Then you connect your water supply lines to the faucet stems and apply more plumber's tape to the shutoff valve threads. The last step is to tighten the coupling nuts to the faucet supply stems, taking care not to overtighten.
Can a pastor elect make decisions for the church before they are installed as the pastor?
This would be entirely up to your congregation and/or supervising clergy. There are definitely places where this is perfectly acceptable and other places where it would be frowned upon.
Should windows be installed in framing before sheathing or siding?
Windows are typically installed after the sheathing and house wrap (water-resistive barrier), but before the final siding. This order allows for proper flashing and sealing, ensuring a weather-tight and energy-efficient installation. Always follow the window manufacturer's instructions.
1995 Chevy suburban.Changed wires plugs distributor cap and rotor why wont it start?
If it was starting before and you were only doing tune-up work, you've probably installed the new wires in the wrong firing order. On the other hand, if it wasn't running before and it's still not running then whatever wasn't working before still isn't working...
What is difference between cold commissioning and hot commissioning?
you can take the car as sample before the car key has turn on, the engine is not running, you go to check the brake, windshield, tie, enigne, eletrical system....is installed well or not and the defect of component, this procedure is cold commisonning after you turn on, the engine is running, then you check again to detect the flaw. this is hot-commissioning you will always like to know the engine is installed well before you run it and make sure it run well the drive the car.
Should the ram be installed before the CPU?
Since the computer won't work without both of them installed it doesn't matter which is installed first.
What did mccain do for his state before running for president?
McCain was the senator from Arizona before running for president.
What are some important maintenance tips for outdoor faucets?
Some important maintenance tips for outdoor faucets include insulating them in cold weather to prevent freezing, checking for leaks regularly, and turning off the water supply to the faucet before winter to avoid damage.
How long before you can walk on tile after it has been installed?
You can typically walk on tile after it has been installed for about 24 hours.
How many pages does Running Before the Wind have?
Running Before the Wind has 152 pages.
What is the ISBN of Running Before the Wind?
The ISBN of Running Before the Wind is 0-395-42116-0.
