0
What else can I help you with?
What type of power supply does the Sony GVD200 Portable VCR require?
The Sony GVD200 Portable VCR requires a 3.5 watt external power adapter.
How can you play an 8mm tape in a VCR player?
AnswerHi,No. VCR's use 1/2" tape and not 1/4" tape. And as far as I know, there are no 8mm. adapters for VS tape players. Chances are good thoug that if you do some research you may find an 8mm. player for your tapes by searching the 'net.Good luck,CubbyActually, there's an adapter that looks just like a VCR tape. You put your 8mm tape inside of the adapter cartridge and then put it in the VCR.________________________________________________________________________Well there is no such adaptors. It can be verifiably concluded that it is both mechanically and electronically impossible for a VHS (or S-VHS) VCR to play or read the information recorded on an 8mm/Hi8, or miniDV tape. Any claims to the contrary are erroneous, and must be required to be accompanied by a physical demonstration to be considered legitimate. Anyone offering such a device for sale is either mistakingly identifying a VHS-C/VHS adapter for an 8mm/VHS adapter, or they are outright scamming the consumer.
Has a VCR got a magnet inside it?
yes
What does a video cassette adapter do?
A video cassette adapter allows your computer or other digital video equipment to play back video cassettes. If for example you have a newer video card in your computer you can connect the adapter to it and the vcr to play the cassette on your computer.
does the Optoma Technol SCART to VGA and S Video Adapter work for VCRs?
It does, but only if the VCR has S-Video and VGA inputs.
Are there any treasures inside a VCR?
No but people are making videos showing there are
Vhs cassette adapter to insert 8mm tapes for viewing on VCR?
yes there is an adapter.very hard to find. i have seen several since the mid 90's.
If your home theater receiver has one optical audio and one coaxial audio input on it is there an adapter you can buy that will allow two devices to hook up to the same input?
AnswerOften a VCR or DVD will have an input as well as an output. Depending on the device, you can leave the input plugged in to your VCR, and plug the output into your home theater, giving you regular input when the VCR is not in use. When the VCR isn't turned on it's just a "pass through" device.
Do I need a VCR stand for my VCR to work properly?
A VCR stand is not necessary to make a VCR working properly as it is only a piece of furniture used to hold the VCR. A VCR will work as long as it is plugged into the wall and hooked up to a TV.
What is the abbreviations of VCR of computer?
The abbreviation of VCR is...
What does a VCR tape cartridge weigh?
Based on the outer shell and the film on the inside more movie more film so it changes.
Is it possible to connect a PC monitor to a VCR?
There are several ways to hook a vcr up to a PC monitor, but most of them depend on the outputs of the vcr and inputs and other features of the monitor. The easiest and usually cheapest way is to buy a tv tuner for your PC. These tuners cost from $20-$200. Another way is to use a vga box which will de-interlace the vcr input and upscale the rez for the monitor. If your vcr has rca component out and the moniter supports sync on green then you could use a straight through component to vga adapter. Also some older monitors as well as fairly expensive new ones may have some type of rca or s-video input.
