answersLogoWhite

0

If you know that the ring has not flushed into the main line, remove the p-trap from under the sink. The ring will most likely be in there. The p-trap is the u-shaped section of the drain pipe.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the purpose of the sink o ring and how does it contribute to the functionality of a sink?

The purpose of the sink o-ring is to create a watertight seal between the sink drain and the plumbing system. This seal prevents water from leaking out of the sink and helps maintain proper drainage functionality.


What is the dark brown ring around sink drain?

It is either Magnesiun oxide or Iron oxide


Is the drain leaking in your sink?

Yes, the drain in your sink is leaking.


Is the sink leaking at the drain?

Yes, the sink is leaking at the drain.


What is the standard size for a sink drain, specifically for a 1 1/4 sink drain?

The standard size for a sink drain, specifically for a 1 1/4 sink drain, is 1 1/4 inches in diameter.


How do you replace garbage disposal?

Disconnect the drain hose from the dishwasher if there is one connected, the drain for the disposal hooked to the sink drain and the electrical supply. The disposal itself is held in place with a locking ring. Right below the sink, you will see a ring that has 3 tabs sticking out that look like 1 inch pieces of tube. Use a phillips head screwdriver in the tube as a pry bar and rotate the ring counterclockwise. Hold up on the disposal while doing this. The piece that is in the sink should be held up with 3 bolts. Unscrew them to loosen the plate they are pushing against. With the plate loose, you can take the snap ring off the bottom of the drain and take it out of the sink. To install the new disposal. reverse the process. Use plumber putty or silicone under the edge of the new drain. It really isn't very hard to do.


What is the purpose of a sink drain flange and how does it contribute to the functionality of a sink?

The purpose of a sink drain flange is to connect the sink to the drain pipe. It helps to seal the connection and prevent leaks, ensuring that water and waste flow properly down the drain. The flange also provides a stable base for the sink drain assembly, contributing to the overall functionality and efficiency of the sink.


Where is the drain outlet located in the kitchen sink?

The drain outlet in a kitchen sink is typically located at the bottom of the sink basin, near the back of the sink.


Is your sink drain stuck and causing water to back up in the sink?

Yes, if your sink drain is stuck, it can cause water to back up in the sink.


How can I remove the drain plug from the sink?

To remove the drain plug from the sink, simply reach under the sink and locate the plug. Twist it counterclockwise to unscrew it, then lift it out of the drain.


Can a basement drain be tied into a sink drain?

Heck no as the sink is higher then the basement drain and water does NOT flow up hill BUT it does seek its own level BUT you can connect a sink drain to a basement drain if you properly trap and vent the line


Is your sink drain stuck closed, causing water to not drain properly?

Yes, if your sink drain is stuck closed, it can cause water to not drain properly.