answersLogoWhite

0

Invest in a Plumbing how-to book. Info is invaluable. Plumbing codes may be a problem, they differ with locale.

Normally the waste is no less then 2" and 30" high and is piped into a 2" P trap IF your piping it into a kitchen sink provided the waste is 2" them some codes do allow a direct hook up if the discharge tee is at least 3/4" diameter

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What does a washing machine drain pipe diagram illustrate?

A washing machine drain pipe diagram illustrates how water from the washing machine is carried away from the machine through a pipe to a drainage system or sewer.


Do i need a tub for the washing machine to drain can't i just drain it into a drain pipe?

You can drain it directly into a drain pipe. Just make sure the the top of the drain pipe is even with the top of the washing machine. If not, the water from the washing machine will drain all of the time. There is no valve in the machine to stop the water from draining. The washing machine drains using a pump motor.


Can a sink drain and a washing machine share a stand pipe drain successfully?

No, stand pipe for washing machine is meant only for washing machine. Tie sink into drain line that washing machine stand pipe is tied into. 2" minimum drain line should be what you tie into. Sink drain line use 1 1/2".


What size drain pipe should be used for a washing machine?

A 2-inch drain pipe is typically recommended for a washing machine to ensure proper drainage and prevent clogs.


How can I properly install a washing machine hookup in my laundry room?

To properly install a washing machine hookup in your laundry room, you will need to first locate the water supply lines and drain pipe. Then, connect the hot and cold water hoses to the corresponding water supply lines and secure them tightly. Next, connect the drain hose to the drain pipe and ensure it is properly secured. Finally, plug in the washing machine and test it to ensure there are no leaks.


What is the best way to properly install and maintain a waste pipe for a washing machine?

To properly install and maintain a waste pipe for a washing machine, ensure it is connected to a drain line with a P-trap to prevent odors and blockages. Regularly check for leaks, clogs, and proper drainage to maintain the pipe's functionality.


Why does the washing machine drain overflow?

The washing machine drain may overflow due to a clog in the drain pipe, a malfunctioning pump, or an issue with the machine's water level sensor.


What is the recommended washing machine drain pipe size for optimal performance and efficiency?

The recommended washing machine drain pipe size for optimal performance and efficiency is 2 inches in diameter.


How can I replace a washing machine drain hose?

To replace a washing machine drain hose, first unplug the machine and turn off the water supply. Locate the hose at the back of the machine and disconnect it from the drain pipe. Remove any clamps or fasteners holding the hose in place. Install the new hose by connecting it to the drain pipe and securing it with clamps. Test the machine to ensure the new hose is properly installed and functioning.


Why does my washing machine drain smell like sewage?

The smell of sewage in your washing machine drain may be due to a buildup of bacteria, mold, or debris in the drain pipe. This can happen if the machine is not cleaned regularly or if there is a blockage in the drain system. It is important to clean the machine and the drain pipe regularly to prevent this unpleasant odor.


How can I prevent clogs in my washing machine drain pipe?

To prevent clogs in your washing machine drain pipe, regularly clean the lint filter, avoid washing large amounts of lint-producing items at once, use a lint trap on the drain hose, and periodically flush the drain pipe with hot water and vinegar.


How do I properly perform a washing machine drain hose replacement?

To properly perform a washing machine drain hose replacement, first unplug the machine and turn off the water supply. Remove the old hose by loosening the clamp and pulling it off the drain pipe. Install the new hose by attaching it to the drain pipe and securing it with a clamp. Make sure the hose is not kinked or twisted. Test the machine by running a cycle to ensure there are no leaks.