0
There are two main methods of sprinkler system installation: open trench and pulled pipe. Open trench typically uses PVC pipe and pulled pipe typically uses poly pipe. Other than the pipe and fittings, the main difference in installation will be that the pulled pipe system requires a hole and saddle tee at the location of each sprinkler head.
The steps for installing an automatic sprinkler system using an open trench method are:
1. Start with a good sprinkler system design (try searching "sprinkler system designer" for support options)
2. Make sure that you have all necessary tools, equipment, and permits
3. Have Blue Stakes mark all utilities prior to any digging
4. Install a backflow prevention device according to code
5. Place flags at the location of each sprinkler head
6. Mark and dig all trenches and valve manifold locations
7. Build and install valve manifolds (preassembled valve manifolds can make this easier)
8. Connect mainline pipe from water source connection to valve manifolds
9. Lay lateral line pipe from the valve manifolds to the location of each sprinkler head
10. Install tees and swing assemblies for each sprinkler head and flush lines
11. Connect sprinkler heads to swing assemblies; set head to level with ground
12. Install sprinkler timer/controller and connect sprinkler wire from timer to valve manifolds
13. Install nozzles on sprinkler heads
14. Install valve boxes (as required) and backfill all trenches
15. Run a zone by zone test and adjust nozzle patterns
What else can I help you with?
Will you get a discount on homeowners insurance if you install a sprinkler system?
=== === If its a yard sprinkler, no. If its a fire sprinkler, yes.
Which type of fire sprinkler system is most common and easiest to install?
Wet pipe sprinkler
Where can I get information on sprinkler systems?
Kudzu.com has information on sprinkler systems as well as Rainbird.com. Both of these websites as well as 1-800 Contractors seems to have the most information on where to get a sprinkler system as well as who to install it.
How can I install a backflow preventer for sprinkler systems?
To install a backflow preventer for sprinkler systems, follow these steps: Turn off the water supply to the sprinkler system. Locate the main water line and cut it where you want to install the preventer. Install the backflow preventer according to the manufacturer's instructions. Connect the preventer to the main water line using appropriate fittings. Turn the water supply back on and test the preventer for leaks. Ensure the preventer is properly installed and functioning correctly to prevent backflow in the sprinkler system.
How can I set up a Rainbird sprinkler system in my yard?
To set up a Rainbird sprinkler system in your yard, follow these steps: Plan the layout of the sprinkler system based on your yard's size and shape. Install the necessary piping and valves according to the layout plan. Connect the sprinkler heads to the piping and adjust their positions for optimal coverage. Install a controller to program watering schedules and zones. Test the system to ensure proper functioning and make any necessary adjustments.
lawn sprinkler installation?
form_title=lawn sprinkler installation form_header=9623 What items will you need this system to water?*= [] Grass [] Trees [] Shrubs [] Flower beds [] Herb garden [] Vegetable garden [] Raised beds [] Hanging baskets Will the sprinkler lines need to be trenched under any existing driveways or pathways?*= {Select One,Yes,No,Don't Know} Is a time-clock required to control the system?*= {Select One,Yes,No,Don't Know} Please specify the nature of the project.*= () Install new sprinkler system in bare yard () Install new sprinkler system in existing yard () Update and add to existing sprinkler system
How can I split a zone in an existing sprinkler system?
To split a zone in an existing sprinkler system, you can install a new valve and connect it to the existing system. This will allow you to control the watering schedule and coverage of the new zone separately from the existing zones.
How do you install solenoid on sprinkler system?
First locate bad solenoid. Once you have found it, unscrew wife nuts and disconnect the black wires from the other wires. Then simple unscrew the solenoid... Do all this with sprinkler system off
How can I effectively install a sprinkler system using PVC pipe?
To effectively install a sprinkler system using PVC pipe, follow these steps: Plan the layout of the system, including the location of sprinkler heads and main water supply line. Dig trenches for the PVC pipes, making sure they are at the correct depth and slope for proper water flow. Connect the PVC pipes using appropriate fittings and glue, ensuring a secure and leak-proof connection. Install sprinkler heads at the designated locations, making sure they are level and secure. Test the system for leaks and proper water distribution before covering the trenches.
What is a sprinkler system for a house?
A sprinkler system is a device that waters your plants or grass
What is the purpose of a sprinkler head plug and how is it used in a sprinkler system?
A sprinkler head plug is used to block off a sprinkler head in a sprinkler system. It is typically used when a sprinkler head needs to be temporarily removed or replaced. The plug prevents water from flowing out of the system through the open hole where the sprinkler head would normally be.
Irrigation Systems?
form_title= Irrigation Systems form_header= Install an irrigation system in your home. Do you currently have an irrigation system?*= () Yes () No Do you currently use a sprinkler system?*= () Yes () No What is your budget?*= _ [50]
