answersLogoWhite

0

Easiest way would be to replace the flush valve, otherwise there is a washer underneath that is easily replaced

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why after transmission fluid flush when cold transmission is not engaging after warming up few minutes everything works fine?

Low fluid level or sticking check ball or sticking valve body.


How do you fix a dual flush toilet?

A defective flush valve causes the leak in toilets. A flush valve is a flap or ball plunger device that is supposed to act as a stopper in the bottom of the toilet tank. So to fix your toilet and save water, get any professional plumber to repair the valve or complete replacement kit . alliedallcityinc.com


What would cause a 2001 Lexus IS 300 to drive in manual when it is in drive?

sound like the valve body is sticking if you car is over 50000 miles have trans. flush


Where is it possible to purchase a replacement flush valve?

You can purchase a replacement flush valve in every do-it-yourself store or you can call a plumber, who can replace the old flush valve and install the new one.


How do I troubleshoot and replace a malfunctioning toilet tank flush valve?

To troubleshoot and replace a malfunctioning toilet tank flush valve, first turn off the water supply to the toilet. Remove the tank lid and inspect the flush valve for any visible damage or debris. Clean or replace the flush valve if necessary. To replace the flush valve, disconnect the water supply line and unscrew the old valve from the tank. Install the new flush valve according to the manufacturer's instructions and reattach the water supply line. Turn the water supply back on and test the flush valve to ensure it is working properly.


What are the steps to replace a Kohler toilet flush valve?

To replace a Kohler toilet flush valve, first turn off the water supply to the toilet. Flush the toilet to empty the tank. Remove the tank lid and disconnect the water supply line. Unscrew and remove the old flush valve. Install the new flush valve according to the manufacturer's instructions. Reconnect the water supply line, turn on the water, and test the flush valve for proper operation.


What are the different types of toilet cistern parts and their functions?

Toilet cistern parts include the fill valve, flush valve, flapper, overflow tube, and handle. The fill valve controls the water level in the cistern, while the flush valve releases water into the bowl. The flapper seals the flush valve, the overflow tube prevents flooding, and the handle activates the flush.


What is the purpose of the flush valve gasket in a toilet system?

The purpose of the flush valve gasket in a toilet system is to create a watertight seal between the flush valve and the toilet tank, preventing leaks and ensuring proper flushing of the toilet.


What are the steps to install a Kohler flush valve kit in a toilet?

To install a Kohler flush valve kit in a toilet, first turn off the water supply to the toilet. Remove the tank lid and flush the toilet to empty the tank. Disconnect the water supply line and unscrew the old flush valve from the tank. Install the new Kohler flush valve according to the manufacturer's instructions. Reconnect the water supply line, turn on the water, and test the flush valve to ensure it is working properly.


What are the different parts of a toilet water tank?

The main parts of a toilet water tank are the fill valve, flush valve, flapper, overflow tube, and handle. The fill valve controls the water level in the tank, the flush valve releases water into the bowl, the flapper seals the flush valve, the overflow tube prevents the tank from overflowing, and the handle is used to flush the toilet.


How do I perform a Kohler toilet flush valve replacement?

To perform a Kohler toilet flush valve replacement, first turn off the water supply to the toilet. Remove the tank lid and flush the toilet to empty the tank. Disconnect the water supply line and unscrew the mounting nut to remove the old flush valve. Install the new flush valve by following the manufacturer's instructions, then reattach the water supply line and turn the water back on. Test the flush valve to ensure it is working properly.


What are the common signs and solutions for a toilet flush valve leaking?

Common signs of a toilet flush valve leaking include a constantly running toilet, water pooling around the base of the toilet, and a weak flush. Solutions for a leaking flush valve may include replacing the flapper or seal, adjusting the chain length, or cleaning the valve seat.