0
What else can I help you with?
Can you record a VCR tape to a DVD recorder combo without using a monitor?
Yes. Just conect the VCR outputs (usually red and white for audio, yellow for video) to the DVR inputs. Set the DVR to record from that input, and press Play on the VCR.
Do VCR/DVD Combos have 2 sets of wires?
Most VCR/DVD's only have one set of inputs and one set of output, unfortunately.
How do you switch from VCR to DVD without pressing anything?
if the machine is set to VCR, insert a DVD. and vis versa. -3higgins3-
Is a toshiba DVD recorder set up for plus or minus DVD discs?
If it is a recorder/player for the TV then DVD-R. If it is in your computer it doesn't matter. If you are having problems reading these disks, Your DVD recorder Requires Dual Format or is in need of replacement.
How can you hook up a DVD vcr to a spare tv that is very old that doesn't have anywhere to plug cables in currently have rabbit ear antenna on it that connects to tv with prongs that screw down?
If the VCR and/or DVD don't have the same type of connector that your tv set does, you can buy adapters that will convert from cable to two-prong in order to connect to your tv set. Connect from the OUT connector on the back of the DVD or VCR to the back of the tv where you normally connect the antenna. The antenna is not necessary when viewing the DVD or VCR.
How do you set up a NEC NDT43 - DVD player VCR combo?
You'll find all that in the owner's manual.
How can one copy data from VCR to DVD?
Video and audio OUT from the machine you're playing the original tape from, to Video and audio IN on the machine you're going to make your copy on. Set the recording VCR to `line in`as the input. Start the recording machine first then press play on the playing machine and sit back and relax until they're done.
How do you put video from YouTube videos into your VCR?
Get Final Video Downloader, download the videos(and set it to convert), burn them to a disk, connect you DVD player to your vcr, set the vcr to record, play the disk, when the disk is finshed stop recording, job done. *gives you a thumbs up*
Can you transfer photos to a DVD disc?
If you have Windows Vista, then it is possible that you have Windows DVD Maker.This is sufficient enough to create professional-looking DVDs, as the program practically makes the DVD by itself!
TV input 1 works fine using comp1 for DVD recording results in no video?
It sounds like there may be an issue with the connection or settings for the DVD recorder. First, ensure that the DVD recorder is properly connected to the TV and that the correct input source is selected. Additionally, check the settings on the DVD recorder to ensure it's set to output video correctly. If the problem persists, consider testing with a different cable or connecting the DVD recorder to another TV to isolate the issue.
How do you work a DVD recorder?
Similar to a CD burner, a DVD recorder is generally used to record copies of television shows and movies. Using a ""laser technique"", it records these videos onto a blank writable DVD disk. A DVD recorder is generally able to record VHS, DVD+R/+RW and DVD-R/RW. The Recordere always plays VHS, DVD, DVD+r/RW, DVD-R/RW, CD and CD-R/RW formats. Simple to use, you may set a time for burning a TV show or simply press record for imidiate TV/Movie recording, once you've entered a blank writeable DVD into your DVD recorder and begin 'burning'/'recording'.
How do you hook up a VCR and DVD recorder to a satellite receiver and TV?
Go out from the dish set-top box and into the vcr and then out from vcr into the tv. Most receivers have outputs that are RCA (Yellow/Red/White). On the back of your VCR, you should have inputs for RCA. Also have inputs on the back of the Television. There are two ways to go if it is a non-HD receiver: Coaxial and RCA ---- Take the cable output from the back of the receiver (it says "out to tv") and connect that to the input on the VCR. Then take another cable and attach it to the output on the VCR and connect that to the TV's input. This requires you to set the TV to either channel 3 or 4 depending on the setup on the VCR. ---- Take the RCA (Yellow/Red/White) from the receiver to the VCR inputs and plug them in. Hookup the VCR to the TV using the Coax or using the RCA output on the VCR. Note: this will require you to set the VCR to the TV/VCR setting in order to view the Video/Audio output. This would require either changing the channel (Coax output) or changing the TV's video input.
