0
What else can I help you with?
How is the bandwidth allocated in case of FM?
In Frequency Modulation (FM), bandwidth is allocated based on the modulation index, which is determined by the frequency deviation of the carrier signal and the frequency of the modulating signal. According to Carson's Rule, the total FM bandwidth is approximately twice the sum of the maximum frequency deviation and the maximum frequency of the modulating signal. This means that FM signals can occupy a wider bandwidth compared to Amplitude Modulation (AM), allowing for better noise immunity and audio quality. Typically, for standard FM broadcasting, the bandwidth is around 200 kHz.
Does asymmetric connections require the same bandwidth for each direction?
No, asymmetric connections do not require the same bandwidth for each direction. In asymmetric connections, the bandwidth is usually allocated unequally between the upstream (upload) and downstream (download) directions. This is common in DSL, cable, and satellite internet connections.
How much price would be there if you will download 7.10 GB from net?
It depends on your internet service providor, if you go over your allocated bandwidth it can be very expensive
How do you find bandwidth by fdm?
To find bandwidth using Frequency Division Multiplexing (FDM), you first determine the frequency range allocated for each channel within the system. Bandwidth is calculated by subtracting the lowest frequency of the first channel from the highest frequency of the last channel in the multiplexed signal. Additionally, you should account for guard bands, which are unused frequency gaps between channels to prevent interference. The total bandwidth is the sum of the individual channel bandwidths plus any guard bands used.
Compare and contrast a controlled access protocol with a channelizing protocol?
In a controlled access method, the whole available bandwidth belongs to the station that is granted permission either by a central authority or by other stations. In a channelization method, the available bandwidth is divided between the stations. If a station does not have data to send the allocated channel remains idle
What does 509 error mean?
A 509 error, commonly known as a "Bandwidth Limit Exceeded" error, occurs when a website has exceeded its allocated data transfer limit. This typically happens on shared hosting servers where resources are distributed among multiple users. As a result, visitors may be unable to access the site until the bandwidth usage resets, often at the start of a new billing cycle. To resolve this, the website owner may need to upgrade their hosting plan or optimize their site's bandwidth usage.
What is the maximum bandwidth of LAN?
LAN Bandwidth is the bandwidth (Maximum speed) of the Local Area Network
Throughput is sometimes called?
effective bandwidth
Is low bandwidth signal has more power than high bandwidth signal?
no,because generally the lower frequency side existed for lower bandwidth,and higher frequency side existed higher bandwidth,so thus we can say that lower bandwidth has generally has lower power as compared to higher bandwidth.
Can attention be allocated to tasks?
Can attention be consciously allocated to tasks
Can you use all of your bandwidth?
If you don't have unlimited bandwidth then yes!
Does a low bandwidth signal have more power than a high bandwidth signal?
A low bandwidth signal does not have more power.
